Drove to work today, no problems and hasn't given me any problems since it was built. Go to leave and nothing. Car has plenty of power (electrical) but as soon as I try to turn it over I get nothing. Starter doesn't click, engage or anything. All fuses are good under hood and in car.

 

First closely check to ensure all connections are tight and not broken or off completely. If everything is good to go, take something hard, like a metal pipe, and tap / hit the outer casing of the starter and then try to start it. sometimes the starter teeth bind with the flywheel and this can reset them to a position where the starter can then turn over. free and easy to try. try a few times. if it does work, you are no further than you were...

 

also make sure the neutral and clutch switch are ok on the pedal assembly.

 

 

This happened to me yesterday actually lol. Did a valve adjust on my crx. Forgot to put my ground back on the valve cover simple thing like that caused it not to start lol. With that being said check your grounds maybe?

 

^^^^^ I have had this same problem with my ground as well.

 

The cable to that goes to the starter, it's happened to me before