Ok so it's been awhile since I have been on here and such, sadly I had to sell my 88 CRX Si, got entangled in the politics of running into so much red tape trying to locate a lost title. But anyways, I have a '91 civic std hatchback that I am considering dropping a h22 with a b-series transmission on it into this car. I am requesting a parts tips/tricks list so that I will know about how much it will cost me to put this setup together, and any tips or tricks to make this swap easier. Here is a list of some things I know I will need, feel free to suggest missing items.

http://www.explicitspeedperformance.net/EFH22AMMK.html
or
http://hasport.com/store/index.php/m...s-ef/efh1.html

(motor mounts, whichever one gets the best recommendations)

http://www.swapshopracing.com/contents/en-us/d696.html
(only page where I could find the b-series adapter plate.)

That is all I can think of at the moment. I know something is missing but I can't remember it right now.

 

Somebody correct me if I am wrong. I believe you will need mounts specifically made for an H2B set up. In the standard H swap the motor is tilted back. With the H2B set up the motor is mounted straight up and down and because of that you will need an H2B header.

I would go with this.
http://www.jhpusa.com/store/pc/viewP...idcategory=260

 

just checked that its like around 500 bucks cheaper than the one i found i believe i will use that adapter.

 

The one you found is the same thing. JHP is a little more expensive when you add the mounts.