Garage Sale - Turbo / H22 / Prelude stuff DE
Added a Fluidyne full-size rad
Time to clear out the garage, everything located in Newark DE. All pics at the bottom.
2001 Prelude SH 5-speed transmission (M2U4 factory LSD) with ATTS unit - Both trans and ATTS unit have less than 10,000 miles on them. Comes with the little intermediate shaft needed to connect as well. - $750 picked up. Will ship at buyers expense
Full size Fluidyne Radiator- direct fit for a 5th gen prelude in great shape, just has some soot marks from open dump tube, and overspray from undercoating. Comes with single fan (all you need even with A/C), with factory wiring pigtail. Has a rub mark on it from charge piping rubbing it, no issues other than cosmetic -$250 + shipping
Stock h22 intake manifold - $80 + shipping
2.5" to 3" down pipe with flex section - made to mount up to FMAX kit for a 5th gen prelude, has 5 bolt flange for T3 turbo. - $30 plus shipping would prefer picked up.
H22A4 power steering and A/C bracket - $10 each + shipping
H22 AEM fuel rail and regulator, also comes with autometer fuel pressure sending unit - SOLD
R/C 720cc/min injectors OBDII High Impedance have about 20k miles on them - SOLD
PWR Air to Water intercooler setup - charge pipes and brackets designed to fit 4th gen prelude with lovefab mini-me manifold and Venom intake manifold. Comes with 6x8 intercooler with 3" inlet/oulet, pump, heat exchanger with fan, 5 gal fuel cell for coolant tank, all lines and fittings, straps etc. Everything to get you up and running is included. Charge pipe has a 50mm tial BOV flange and GM IAT sensor bung. SOLD
H23 distributor, doesn't have the rotor but the rest is there-$40 shipped
AEM power steering pulley for h22 - $25 shipped
H22 valve cover - needs repainted, badly (I didn't paint it) - SOLD
All prices are OBO, but lets be serious.
Time to clear out the garage, everything located in Newark DE. All pics at the bottom.
2001 Prelude SH 5-speed transmission (M2U4 factory LSD) with ATTS unit - Both trans and ATTS unit have less than 10,000 miles on them. Comes with the little intermediate shaft needed to connect as well. - $750 picked up. Will ship at buyers expense
Full size Fluidyne Radiator- direct fit for a 5th gen prelude in great shape, just has some soot marks from open dump tube, and overspray from undercoating. Comes with single fan (all you need even with A/C), with factory wiring pigtail. Has a rub mark on it from charge piping rubbing it, no issues other than cosmetic -$250 + shipping
Stock h22 intake manifold - $80 + shipping
2.5" to 3" down pipe with flex section - made to mount up to FMAX kit for a 5th gen prelude, has 5 bolt flange for T3 turbo. - $30 plus shipping would prefer picked up.
H22A4 power steering and A/C bracket - $10 each + shipping
H22 AEM fuel rail and regulator, also comes with autometer fuel pressure sending unit - SOLD
R/C 720cc/min injectors OBDII High Impedance have about 20k miles on them - SOLD
PWR Air to Water intercooler setup - charge pipes and brackets designed to fit 4th gen prelude with lovefab mini-me manifold and Venom intake manifold. Comes with 6x8 intercooler with 3" inlet/oulet, pump, heat exchanger with fan, 5 gal fuel cell for coolant tank, all lines and fittings, straps etc. Everything to get you up and running is included. Charge pipe has a 50mm tial BOV flange and GM IAT sensor bung. SOLD
H23 distributor, doesn't have the rotor but the rest is there-$40 shipped
AEM power steering pulley for h22 - $25 shipped
H22 valve cover - needs repainted, badly (I didn't paint it) - SOLD
All prices are OBO, but lets be serious.
Last edited by spoolinlude; Nov 3, 2011 at 05:04 AM.


