JE 81.5mm 9:1 pistons Eagle LS rods bseries
Thread Starter
Honda-Tech Member
Joined: Jan 2008
Posts: 63
Likes: 0
From: Apple Valley, Ca, USA
JE 81.5mm 9:1 pistons Eagle LS rods bseries
Selling set of JE pistons 81.5mm and 9:1 compression with wrist pins and oil control rings. The top of the pistons have been lightly sanded down to smooth the sharp machined edges. The pistons have also been balanced to within 1/2 a gram. I installed them in an lsvtec but never put the head on the block and now Im parting it out.
$350
B18 LS Eagle rods with ARP 2000 rod bolts. The rods have been balanced to within 1/2 gram. Eagle states they are balanced to within 3 grams, one rod was off by 4 grams. I installed these but never ran or started the motor.
$250
or $600 for both
I do not take Paypal! Postal money order or pickup! Paypal is ok to buy or sell under $100. So dont ask I dont take Paypal for anything over $100 when I sell. Here's my ebay id to show my feedback
http://myworld.ebay.com/ebaymotors/cloneufc
$350
B18 LS Eagle rods with ARP 2000 rod bolts. The rods have been balanced to within 1/2 gram. Eagle states they are balanced to within 3 grams, one rod was off by 4 grams. I installed these but never ran or started the motor.
$250
or $600 for both
I do not take Paypal! Postal money order or pickup! Paypal is ok to buy or sell under $100. So dont ask I dont take Paypal for anything over $100 when I sell. Here's my ebay id to show my feedback
http://myworld.ebay.com/ebaymotors/cloneufc
Thread
Thread Starter
Forum
Replies
Last Post
Russyo
Classifieds: Forced Induction
1
Jun 18, 2010 07:07 PM
