Contact: 434.989.8980
Condition: Listed Below
Prices: Somewhat Negotiable
Trades: CASH Only
Package Deals: Yes

I am selling all of my spare / extra engine parts. All of the items listed below are 110% legitimate (nothing is stolen, no scraped VINs, or any of that bullsh*t). Most of these parts are located in my storage unit in Miami if you'd like to come see them. I do suggest you bring cash with you, because you aren't going to want to leave empty handed.


DARTON MID Sleeved B18C Block $800
- Currently 84mm Bore
- Barely used for 2000 miles before it was removed
- Includes Main Caps and Girdle

ARIAS Turbo Pistons $475
- BRAND NEW in Box
- 84mm bore
- 9.0:1 Compression
- Includes rings and wrist pins
- Pistons are coated

B18C Bare Block $250
- This was my spare block that I planned on building
- Includes Main Caps and Girdle
- Still Standard 81mm bore

B18B (LS) Complete Bottomend SOLD
- Fresh Bearings & Rings 5000 miles ago
- Includes Oilpan, Water pump, Oil pump, etc




B18C5 Integra Type R Cylinder Head SOLD
- FERREA Valves
- FERREA Guides
- Original ITR Dual Valvesprings
- 2000 Type R Cams
- Does NOT Include: Intake manifold, or Distributor
- WILL NEED A VALVE JOB (hence the price)
(scroll down for pictures)

 

up

 

Thanks jdmdb8r !

 

bumpppppppppppppppppppp

 

can I get pics of the b18c stock block

 

Are you willing to ship the b18b bottom end?

 

I have to take some.

 

If you are paying..

 

TTT...........nice price on the C5 head.valve job a must if you take to machine shop anyway.but that's my preference.G/L on sale.

 

Still got the head.. i'm interested in getting that

 

The head is Pending Local Sale ..

 

bump

 

Bump

 

Waiting to hear back about the head. I'll give him one more day to come through..

 

PM me if it doesn't sell.

 

Pm me how much shipping would be to 28273 for the ls bottomend. Any paperwork on rebuild

 

LMK if you still got the head..

 

The bottomend is approx. 150-160lbs, so I'd imagine $120+/- to ship. If that figure doesn't scare you off, please check into it through different carriers. The bottomend would be shipped from Miami, FL 33130.

As far as documentation of the rebuild, I might have the receipts somewhere. It was rebuilt by Tuning Trix in Fort Myers, FL.

Thanks for your interest, please let me know if you are still interested..

 

I have A LOT of people interested in the head, both on here and locally. Nobody has made a Payment yet. The 1st person to Either HAND ME CASH or PAYPAL ME (user ID below) Gets The Head! If you are a runner up, you will be refunded.

PayPal User ID: jason.ibarra.seo@gmail.com

Again, the head needs new guides and seats installed before you can run it. It was disassembled and cleaned by my machinist, and is ready to go see yours

 

Pming you

 

do you have pictures of the darton block? Does the block need to be bored over or anything?

 

I have to take some.. The block is currently 84mm bore with fresh cross-hatching. I also have a set of 84mm 9.0:1 CR pistons if you are planning on boosting it.

lmk

 

Bump !! Let's sell these parts !!

 

Got some serious interest in the B18B bottomend... now my slack *** needs to take some pictures of it !!

 

Bump! Pictures of the B18B bottomend are finally up.. Hopefully tonight I will get pictures of the two B18C/GSR Blocks and post them up.

Thanks Honda-Tech!