I have a b18c1 out of a 96 gsr
block has unknown mileage, does need to be honed and decked
bearings were fine but would suggest rebuilding the motor using new larger bearings and having it line honed for the crank. Crank is in perfect condition, rods are in perfect condition but the caps are from another motor so some machining is required however thats not expensive. New bearings are like 80 and the machining required on this block is roughly $300.

Have a freshly machined b18c1 head out of a 95 gsr, cleaned up and like new condition. $425

Will sell full b18c1 longblock disassembled for $700 with the head block/crank/pistons/connecting rods/oil pan/intake manifold/water pump/oil pump
build a new motor for $1000 for your ride

also have perfect ap1 s2000 tail lights for sale $210 obo

 

ttt