Civic EG Coupe $1600
Thread Starter
Honda-Tech Member
Joined: Apr 2009
Posts: 47
Likes: 0
From: Burlington, WA
Civic EG Coupe $1600
If anyone is interested just text me anytime at 360 720 8679 or pm me? i can answer any questions you wanna ask. PLEASE READ WHOLE POST before you text me.
*The block just started knocking a day or two ago. Very light. I actualy cant even hear it right now.. but obviously it'll still need rebuilt or a new block. So thats why its pretty cheap. It runs good and drives.*
Just replaced the distributor, injectors, fuel pressure regulator, main relay and fuel pump and the timing belt was just done.
Its a 95 DX. its has a D16Y8 block (120k) with a Z6 head (170k). Gsr throttle body. BRAND NEW head gasket, throwout bearing, clutch slave cylinder, cap, rotor, ignition coil, plug wires and spark plugs.
Has an ACT 6 puck clutch. Short Shifter. Chipped ECU. Neuspeed front strut bar.
Has a very clean black interior. Deep dish steering wheel w/NRG horn button and momo hub. EX/Si front lip. Lowered on no name coilovers. Bronze LS webs. 4-2-1 Header to a brand new 2.5 inch exhaust.
It has a couple minor dents here and there, nothing major or noticeable and the paints a little faded on the driver side and trunk. a wax and buff might help. Front bumper was cut out for fogs and an intercooler. salvaged title dude to theft. The driver side cv axle is bad. and vtec isnt wired up and needs a new IACV.
1600 cash takes it. or trade for an eg hatch?
*The block just started knocking a day or two ago. Very light. I actualy cant even hear it right now.. but obviously it'll still need rebuilt or a new block. So thats why its pretty cheap. It runs good and drives.*
Just replaced the distributor, injectors, fuel pressure regulator, main relay and fuel pump and the timing belt was just done.
Its a 95 DX. its has a D16Y8 block (120k) with a Z6 head (170k). Gsr throttle body. BRAND NEW head gasket, throwout bearing, clutch slave cylinder, cap, rotor, ignition coil, plug wires and spark plugs.
Has an ACT 6 puck clutch. Short Shifter. Chipped ECU. Neuspeed front strut bar.
Has a very clean black interior. Deep dish steering wheel w/NRG horn button and momo hub. EX/Si front lip. Lowered on no name coilovers. Bronze LS webs. 4-2-1 Header to a brand new 2.5 inch exhaust.
It has a couple minor dents here and there, nothing major or noticeable and the paints a little faded on the driver side and trunk. a wax and buff might help. Front bumper was cut out for fogs and an intercooler. salvaged title dude to theft. The driver side cv axle is bad. and vtec isnt wired up and needs a new IACV.
1600 cash takes it. or trade for an eg hatch?
Thread
Thread Starter
Forum
Replies
Last Post
GetawayInMoscow
Forced Induction
14
Jul 30, 2007 06:04 PM
