Located in San Francisco, CA. Some prices may be negotiable, but please do not lowball. I feel the prices are already fair. I am PayPal verified, but will only ship to a confirmed PayPal address due to a bad experience in the past. Shipped prices are to the lower 48 states, outside of that is extra..


SRR 30mm Steering Spacer. SOLD..


SARD High Flow Catalytic Converter. SOLD..


I am selling my set of 17x8 / 17x7 +26 all around Work Meister S1 wheels. They were originally white with a polished lip, but were in rough condition. I had them chemically stripped and powdercoated dark metallic gray by MAAS Brothers Powdercoating in Livermore, CA. Due to the wheels 2 piece construction, when it was powdercoated, there are little dots around the wheel bridging the two pieces. This can only be seen very up close and isn't too noticeable, but just thought I would mention it. The wheels are in perfect condtion and there are no scratches, curbs, cracks or bends. After powdercoating, I applied brand new OEM Work lip and spoke stickers and brand new Work valve stems. Mounted on the wheels are 215/40/17 Falken Azenis RT-615K. They have about 1500 miles on them, and the fronts still have about 85% left. The rears have about 95% left and you can still see the "Azenis" logo on the tread of the tires. These wheels are aggressive fitment, and the x8's have a 3" deep step lip. 17's are the new 16's!!

I am asking $1400 without tires or $1750 with tires..

https://honda-tech.com/forums/wheels-119/fs-17x8-17x7-26-work-meister-s1-wheels-5x114-3-metallic-gray-sf-ca-2956631/


Chipped OBD1 "P28" ECU. Used but in perfect working condition. I am not sure what this ECU started life out as, but it has been converted to a P28. It is chipped and socketed and was used with a Hondata S200. It is now currently running a Rywire chip, and ran fine in my EK.
$150 shipped..

Chipped and socketed..



SPA Design Emergency Pull Cable. SOLD..


Polyurethane Replica Mugen Front Lip for Honda Del Sol. Used and in decent shape. Spray painted black, but could use a real paint job. Has a few holes drilled in random spots for mounting.
$40 picked up..

Some holes..




2001 Integra Type R OEM Clutch Kit. Used with approximately 40k miles. Doesn't look like it was driven hard at all, as there is a lot of meat left on the disc, and you can still see the OEM machining on the pressure plate surface. Pressure plate surface is smooth with no grooves or excessive wear.
Pending for the longest time..

Machining marks..

Lots of meat left..




1999 Honda Civic OEM Clutch Kit. GONE..


2000 Honda Civic OEM Suspension Links and Arms. Used but in good condition. All bushings are still in great shape.
Front upper A-arms SOLD..
Rear upper links $30 + shipping..
Rear lower control arms $40 + shipping..



Genuine Top Fuel clear print stickers. Brand new and never applied. Was going to put these on my Top Fuel wing, but went a different route. Sticker dimensions are approximately 5.5" x 2.5". $10 shipped for both..

 

pick up your damn phone

dibs on sohc clutch

 

steering spacer sold!!

 

bump!

 

bump!