1996 Accord EX, External cap conversion
I've been having a rough idle issue and I've finally isolated it to the distributor. Normally I'd replace it with OEM parts but my friend gave me his MSD ignition kit for free since he no longer has his accord.
Here are the parts I currently have:






My questions are: What are all these parts?
What parts am I missing?
What do they do? I find it's pointless installing parts if you don't know what they do.
Lastly, I've tried searching, I couldn't find a write up on installing an external coil on an internal coil car. At least, nothing descriptive. I've never done anything more difficult than the typical intake/header so if someone could find a write up with pictures, or if someone could walk me through this, I'd love to get my car up and running!
Here are the parts I currently have:






My questions are: What are all these parts?
What parts am I missing?
What do they do? I find it's pointless installing parts if you don't know what they do.
Lastly, I've tried searching, I couldn't find a write up on installing an external coil on an internal coil car. At least, nothing descriptive. I've never done anything more difficult than the typical intake/header so if someone could find a write up with pictures, or if someone could walk me through this, I'd love to get my car up and running!
here you...its in the FAQ...https://honda-tech.com/forums/showth...641545.....and the other https://honda-tech.com/forums/showth...348699....hope that helps
Thread
Thread Starter
Forum
Replies
Last Post




