Hi, i got some problem with my civic ferio, engine shutoff while running. I need to tun off engine, leave it about 3-5 minute then start, engine running. But it will shutoff engine again while running.

I try to open and look on ecu board and i found there burn mark on C29, C31 and few component around it, i cannot see what the value for the tantalum capacitor.

Cannot find much on google, and i also dont have spare P30 ecu to refer.

And what exactly that burn component and circuit area function for?

 

Refer to the picture i attached , please correct if it wrong.
A = C32-----------> 35v 33uF
B = N5------------> 103 100v
C = C30----> what this tantalum cap value?
D = C31----------->16v 220uF
E = L2------------> what this component name and the vallue?
F = C29-----------> what this tantalum cap value?


also there R88 burn also cannot see the color code.

Car can start, but it will shut off engine by it self..

 

i got it.. same with P28 ecu C16 & C17
C29 is a 1uf 35v tantalum cap
C30 is a 4.7uf 16v tantalum cap

And P30-900 R88 same value to P28-G01 R77. 6.6ohm - 7.6ohm

I just dont know what it call for L2..Hm

 

Hi, i cannot get 33uF 35v it is ok if i replace with 33uF 50v capsitor?