DC2 Cusco 6 point Cage / Mugen FG360 / DC2 Endless Calipers...And Other Oddities
Thread Starter
Joined: Apr 2005
Posts: 5,343
Likes: 0
From: Los Angeles.
DC2 Cusco 6 point Cage / Mugen FG360 / DC2 Endless Calipers...And Other Oddities
Most stuff is negotiable, but no trades please.
Call/text for immediate response: 626.271.4164
Located in SoCal - City of Industry area.
K, here we go....
Brand new BYS DC2 front bumper. Drilled for ARC Magic winglets (not included). Unpainted and never used (i.e. no scrapes/cracks/anything). The bottom has holes from the ARC canards. Asking $900 firm.
98' spec Spoon Assembled Integra Type R Transmission with ATS 4.9 FD and a Kaaz 1.5 way clutch type LSD. 2500 miles, it is pretty much new. Asking $2,000.
Recaro SRD's with rails. 9/10 condition. $1,100
JDM power folding mirrors. These have a yellow anti-glare lens on them, I've never seen another pair like these. I also performed the USDM base swap, which means that the mirror angle is correct for LHD. Set includes: JDM power folding mirrors, relay, door switch, pigtail harnesses, inside mirror caps, a set of donor USDM mirrors that I used for the base swap and the original JDM bases. Asking $400
Mugen FG360 with DC2 hub. Horn buttons are perfect. Some wear on top of wheel. $800
Koyo polished aluminum radiator. New and never used, but has some wear from storage. Asking $300
98' spec Integra all red tail lights. Clean, no cracks. Some light scratches from storage but it should buff right out. asking $150
Carbon fiber rear diffuser. Universal but I cut it to fit the DC2 rear tow hook. Clear coat cracking as shown in last pic $700
Cusco Safety 21 6 point roll cage. DC2 fitment (no sunroof). Uncoated steel (I was going to get it chrome plated). $800
JDM Personal Box. No Smoking!! The inner felt is CLEAN. $150
Carbon fiber eyelids. Some minor scratching, it could be polished out. Asking SOLD to subliminalitr
DC2 Miracle Cross bar, practically brand new. SOLD
Rare DC2 Shift Sport fenders. These have been drilled and mounted to ensure fitment, but they are unpainted. I can personally say that if you know how to align your hood/bumper/fenders - you can get a very nice fitment with these. Not as good as stock, but very good for aftermarket. These have stress cracks from storage - a body shop will need to prep these for paint. Asking SOLD
DC2 Endless 4 piston brake calipers. These are the earlier model. Serial Number 401–025 and verified authentic by Ganesh Krishnan of Endless USA. Comes with homemade adapter kit, brand new Endless pads, and stainless steel brake lines. SOLD
Carbing three point strut brace. DC2 / EG fitment. Asking SOLD to DBiNfEcTeD* on HT.
Beatrush cooling plate. DC2 fitment SOLD to Certified Honda
Mugen Version 1 spoiler WITH BRAND NEW AUTHENTIC MUGEN EMBLEMS. The emblems are hard to get unto itself. SOLD to OG
4x114 15mm wheel spacers. I have 2 pairs. You'll need extended wheel lugs to use these. SOLD to phunhaus on HT.
GSR head. port and polished, 3 angle valve job, Supertech valves / springs/ retainers. Never installed and never started. SOLD
Innovative billet motor mounts for B series into DC/EG chassis. Includes 3 pieces (left tranny mount, rear motor mount, and right motor mount). Rubber bushings need to be replaced, Innovative offers that service. Asking SOLD
Toda Flywheel and pressure plate for B series. Weighs alittle over 8lbs. SOLD
Carbon fiber eyelids. Some minor scratching, it could be polished out. Asking SOLD
Call/text for immediate response: 626.271.4164
Located in SoCal - City of Industry area.
K, here we go....
Brand new BYS DC2 front bumper. Drilled for ARC Magic winglets (not included). Unpainted and never used (i.e. no scrapes/cracks/anything). The bottom has holes from the ARC canards. Asking $900 firm.
98' spec Spoon Assembled Integra Type R Transmission with ATS 4.9 FD and a Kaaz 1.5 way clutch type LSD. 2500 miles, it is pretty much new. Asking $2,000.
Recaro SRD's with rails. 9/10 condition. $1,100
JDM power folding mirrors. These have a yellow anti-glare lens on them, I've never seen another pair like these. I also performed the USDM base swap, which means that the mirror angle is correct for LHD. Set includes: JDM power folding mirrors, relay, door switch, pigtail harnesses, inside mirror caps, a set of donor USDM mirrors that I used for the base swap and the original JDM bases. Asking $400
Mugen FG360 with DC2 hub. Horn buttons are perfect. Some wear on top of wheel. $800
Koyo polished aluminum radiator. New and never used, but has some wear from storage. Asking $300
98' spec Integra all red tail lights. Clean, no cracks. Some light scratches from storage but it should buff right out. asking $150
Carbon fiber rear diffuser. Universal but I cut it to fit the DC2 rear tow hook. Clear coat cracking as shown in last pic $700
Cusco Safety 21 6 point roll cage. DC2 fitment (no sunroof). Uncoated steel (I was going to get it chrome plated). $800
JDM Personal Box. No Smoking!! The inner felt is CLEAN. $150
Carbon fiber eyelids. Some minor scratching, it could be polished out. Asking SOLD to subliminalitr
DC2 Miracle Cross bar, practically brand new. SOLD
Rare DC2 Shift Sport fenders. These have been drilled and mounted to ensure fitment, but they are unpainted. I can personally say that if you know how to align your hood/bumper/fenders - you can get a very nice fitment with these. Not as good as stock, but very good for aftermarket. These have stress cracks from storage - a body shop will need to prep these for paint. Asking SOLD
DC2 Endless 4 piston brake calipers. These are the earlier model. Serial Number 401–025 and verified authentic by Ganesh Krishnan of Endless USA. Comes with homemade adapter kit, brand new Endless pads, and stainless steel brake lines. SOLD
Carbing three point strut brace. DC2 / EG fitment. Asking SOLD to DBiNfEcTeD* on HT.
Beatrush cooling plate. DC2 fitment SOLD to Certified Honda
Mugen Version 1 spoiler WITH BRAND NEW AUTHENTIC MUGEN EMBLEMS. The emblems are hard to get unto itself. SOLD to OG
4x114 15mm wheel spacers. I have 2 pairs. You'll need extended wheel lugs to use these. SOLD to phunhaus on HT.
GSR head. port and polished, 3 angle valve job, Supertech valves / springs/ retainers. Never installed and never started. SOLD
Innovative billet motor mounts for B series into DC/EG chassis. Includes 3 pieces (left tranny mount, rear motor mount, and right motor mount). Rubber bushings need to be replaced, Innovative offers that service. Asking SOLD
Toda Flywheel and pressure plate for B series. Weighs alittle over 8lbs. SOLD
Carbon fiber eyelids. Some minor scratching, it could be polished out. Asking SOLD
Last edited by CARMA_626; Nov 7, 2011 at 09:37 PM.
Honda-Tech Member
Joined: Jun 2008
Posts: 273
Likes: 0
From: Boyle Heights/East Los Angeles, CA, united states
Re: DC2 Cusco 6 point Cage / Mugen FG360 / DC2 Endless Calipers...And Other Oddities
nice stuff, didn't know most of the stuff you have are worth for that much.
Good to know.
GLWS
Good to know.
GLWS
Thread Starter
Joined: Apr 2005
Posts: 5,343
Likes: 0
From: Los Angeles.
Re: DC2 Cusco 6 point Cage / Mugen FG360 / DC2 Endless Calipers...And Other Oddities
Plus, I am negotiable if the offer is fair.
Trending Topics
Thread Starter
Joined: Apr 2005
Posts: 5,343
Likes: 0
From: Los Angeles.
Re: DC2 Cusco 6 point Cage / Mugen FG360 / DC2 Endless Calipers...And Other Oddities
I have the Safety 21 version.
Reference: http://www.cusco.co.jp/en/about_us/l...ds_identi.html
Thread Starter
Joined: Apr 2005
Posts: 5,343
Likes: 0
From: Los Angeles.
Re: DC2 Cusco 6 point Cage / Mugen FG360 / DC2 Endless Calipers...And Other Oddities
All proceeds goes to my business upstart: www.Red-Karma.com
Re: DC2 Cusco 6 point Cage / Mugen FG360 / DC2 Endless Calipers...And Other Oddities
All proceeds goes to my business upstart: www.Red-Karma.com
honest dude here! great seller! help him better his future and buy his parts and some shoes on his web site!
Thread Starter
Joined: Apr 2005
Posts: 5,343
Likes: 0
From: Los Angeles.
