1998 Acura Integra GSR Complete Part Out - Everything's coming off
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
New updated thread: http://hondamarketplace.com/showthread.php?t=2977995
Last edited by milanoteg; Sep 10, 2011 at 07:46 AM.
interested in the shift boot, gsr cluster, gsr steering wheel and maybe some of the suspension parts. email or pm me prices please.
I also need the pedals, clutch master cylinder, and the hardline for the clutch slave cylinder.
I am local and can come take a look and discuss this stuff with you.
I also need the pedals, clutch master cylinder, and the hardline for the clutch slave cylinder.
I am local and can come take a look and discuss this stuff with you.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
Replied!
PM'd
interested in the shift boot, gsr cluster, gsr steering wheel and maybe some of the suspension parts. email or pm me prices please.
I also need the pedals, clutch master cylinder, and the hardline for the clutch slave cylinder.
I am local and can come take a look and discuss this stuff with you.
I also need the pedals, clutch master cylinder, and the hardline for the clutch slave cylinder.
I am local and can come take a look and discuss this stuff with you.
PM'd
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
I'll be getting to everyone's PM's later today. Keep them coming, this thing needs to be gutted ASAP.
Stripping it down to bare bones, everything is up for grabs. I'm going to add anything I've missed along the way, but all parts- aftermarket and OEM- are for sale. Prices will be added as I research their market price, until you see a price next to the part it's Best Offer.
All parts have 120k-150k miles on them depending on whether or not they were replaced with aftermarket parts. This was a milano red GSR, most of the body parts have faded milano red paint (typical). All parts are in great condition unless otherwise stated. Pics can be available upon request. I'd much rather sell locally (I can drive a bit to meet you) but I'll ship at the buyer's expense.
Suspension / Brakes
1- Buddy Club RSD (Racing Spec Dampers) - < 5k miles
2- Skunk2 LCA's (gold) - <5k miles
3- OEM shocks/springs- preferably would like to sell with the rear LCA's
4- OEM rear LCA's
5- Brembo front/rear rotors - 10k miles, blank rotors, lots of life left
6- hawk HPS front pads - 10k miles, lots of meat left
7- hawk HP+ rear pads - 10k miles, lots of meat left
8- Progress Rear Sway bar - 23mm I believe
9- ASR Rear subframe brace - black
Interior (black interior)
1- GSR leather seats (front) - no rips, tears, etc. Pretty good condition actually.
2- GSR leather rear seat - no rips, tears, etc. same as front.
3- Plastic interior panels (I'll make a more elaborate list later, but everything's here)
4- (2) OEM center console w/ leather armrest compartment
5- OEM Climate Control
6- JDM ITR red-stitched shift boot
7- JDM ITR Climate Control (carbon fiber, with A/C button)- ready for install
8- JDM ITR Gauge Cluster- ready for install on 98-01, I can modify to fit 94-97 if you want
9- OEM GSR Gauge Cluster
*I can set the ODO to whatever mileage your integra is at so it'll match up.
10- OEM black carpet - clean clean clean
11- OEM GSR steering wheel - decent condition
Body/Exterior
1- GSR Blades - decent condition, a little curb rash, good tread life left on tires
2- OEM hood - solid condition
3- OEM fenders (right and left) - solid condition
4- OEM front bumper - banged up, no holes, dirt cheap
5- OEM rear bumper - banged up, you'd probably only want it if you NEED a bumper asap, dirt cheap
6- GSR hatch - good condition
7- GSR wing - I'll sell with the hatch or separately, doesn't matter to me
8- LS (?) hatch - has 3rd brake light
9- Sunroof assembly - everything works 100%
10- Headlights
11- Tail lights - passenger side has slight crack
12- Amber turn signals
13- middle tailgate piece
14- side mirrors - great condition
Drivetrain
1- GSR motor - seized up from water intake- may only need minor work, i don't know.
2- GSR tranny - perfect shifts, never gave me problems
*I'd rather sell the motor+tranny together with everything, but I'll part out, doesn't really matter
3- OEM midpipe - BRAND NEW
4- OEM muffler - BRAND NEW
5- OEM muffler tip - BRAND NEW
6- Mishimoto Radiator w/ radiator cap (don't know the model, it's SS, and works great - saved me when my OEM raddy blew)
7- Fujita Cold Air Intake (silver intake)
8- OEM GSR ECU
****Everything is here, I know I'm missing a lot. The more technical things (wiring harness, etc) will be added once the car starts to get stripped down more, but they're here and available, and I'll take them out if you want them.*******
All parts have 120k-150k miles on them depending on whether or not they were replaced with aftermarket parts. This was a milano red GSR, most of the body parts have faded milano red paint (typical). All parts are in great condition unless otherwise stated. Pics can be available upon request. I'd much rather sell locally (I can drive a bit to meet you) but I'll ship at the buyer's expense.
Suspension / Brakes
1- Buddy Club RSD (Racing Spec Dampers) - < 5k miles
2- Skunk2 LCA's (gold) - <5k miles
3- OEM shocks/springs- preferably would like to sell with the rear LCA's
4- OEM rear LCA's
5- Brembo front/rear rotors - 10k miles, blank rotors, lots of life left
6- hawk HPS front pads - 10k miles, lots of meat left
7- hawk HP+ rear pads - 10k miles, lots of meat left
8- Progress Rear Sway bar - 23mm I believe
9- ASR Rear subframe brace - black
Interior (black interior)
1- GSR leather seats (front) - no rips, tears, etc. Pretty good condition actually.
2- GSR leather rear seat - no rips, tears, etc. same as front.
3- Plastic interior panels (I'll make a more elaborate list later, but everything's here)
4- (2) OEM center console w/ leather armrest compartment
5- OEM Climate Control
6- JDM ITR red-stitched shift boot
7- JDM ITR Climate Control (carbon fiber, with A/C button)- ready for install
8- JDM ITR Gauge Cluster- ready for install on 98-01, I can modify to fit 94-97 if you want
9- OEM GSR Gauge Cluster
*I can set the ODO to whatever mileage your integra is at so it'll match up.
10- OEM black carpet - clean clean clean
11- OEM GSR steering wheel - decent condition
Body/Exterior
1- GSR Blades - decent condition, a little curb rash, good tread life left on tires
2- OEM hood - solid condition
3- OEM fenders (right and left) - solid condition
4- OEM front bumper - banged up, no holes, dirt cheap
5- OEM rear bumper - banged up, you'd probably only want it if you NEED a bumper asap, dirt cheap
6- GSR hatch - good condition
7- GSR wing - I'll sell with the hatch or separately, doesn't matter to me
8- LS (?) hatch - has 3rd brake light
9- Sunroof assembly - everything works 100%
10- Headlights
11- Tail lights - passenger side has slight crack
12- Amber turn signals
13- middle tailgate piece
14- side mirrors - great condition
Drivetrain
1- GSR motor - seized up from water intake- may only need minor work, i don't know.
2- GSR tranny - perfect shifts, never gave me problems
*I'd rather sell the motor+tranny together with everything, but I'll part out, doesn't really matter
3- OEM midpipe - BRAND NEW
4- OEM muffler - BRAND NEW
5- OEM muffler tip - BRAND NEW
6- Mishimoto Radiator w/ radiator cap (don't know the model, it's SS, and works great - saved me when my OEM raddy blew)
7- Fujita Cold Air Intake (silver intake)
8- OEM GSR ECU
****Everything is here, I know I'm missing a lot. The more technical things (wiring harness, etc) will be added once the car starts to get stripped down more, but they're here and available, and I'll take them out if you want them.*******
interested in the complete chassis harness, the one that goes behind the dash from the fuseblock to the ecu and out thru the firewall , i would be more than happy to come and help you remove it because i know its a bitch , and i need it uncut and complete
EDIT ---THIS GUY IS IMPOSSIBLE TO MEET UP WITH AND OR BUY PARTS FROM
EDIT ---THIS GUY IS IMPOSSIBLE TO MEET UP WITH AND OR BUY PARTS FROM
Last edited by 91tegraRS; Sep 10, 2011 at 07:26 AM.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
Yep They're in decent shape, too. I don't think the drivers side has a hole in it, and if it does its really small (I'll double check for you if you want them).
PM'd
skunk2's? first $80 will take them.
skunk2's? first $80 will take them.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
Bought it used from a friend of mine for $175 looking to get somewhere in that ballpark. PM me an offer.
Sounds like a bitch but if you'd help I'd be more than willing to sell. By then I'll probably have most of the interior gutted out so it should be a little easier. PM me and we'll work out the details.
Trying to sell the engine as a whole. If I can't sell it in a few months I'll get back to you, but I'm sure I'll find a buyer.
interested in the complete chassis harness, the one that goes behind the dash from the fuseblock to the ecu and out thru the firewall , i would be more than happy to come and help you remove it because i know its a bitch , and i need it uncut and complete
you can call or text me at 443 867 0856 --andy
you can call or text me at 443 867 0856 --andy
Trying to sell the engine as a whole. If I can't sell it in a few months I'll get back to you, but I'm sure I'll find a buyer.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
I also returned EVERYONE's PMs. This weekend I will be GUTTING most of the car, so I will have more parts readily available and more of the little things listed.
If you did not receive a PM back from me, it means your inbox is full. Clear it and send me the PM again.
If you did not receive a PM back from me, it means your inbox is full. Clear it and send me the PM again.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa
Also if I give you a price quote and it seems completely outrageous, just let me know. I'm looking all these prices up on forums and what they normally go for. I'm willing to negotiate a bit.
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Sep 2008
Posts: 327
Likes: 0
From: baltimore, md, usa


