D16A6 block with p29 pistons/z6 head
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 3,818
Likes: 0
From: Dont trip.
D16A6 block with p29 pistons/z6 head
D16a6 block with p29 pistons (higher compression then stock)
new oil pump when block was built (about 10k miles ago)
timing cover
crank pulley
alternator
water pump
timing belt
included is an oilpan but would recommend replacing it due to a large dent
Lightweight flywheel USED
Was built buy a fellow tech at my dealership and it was in his brothers daily driver for about a year then he got rearended and parted it out (motor ran fine when pulled). i bought the motor to put into my daily but i got rid of it before i swapped...so now its for sale
$300 pretty firm
Also can include a z6 head (was on it when it was running) but i removed it to do headstuds. but never completed the job
$75 for the cyl head (rebuilt the same time as the block)
comes with intake manifold (pretty bare)
valve cover
Can include dizzy +wires for another $40
located in chicago area ...willing to meet up within 30 min of ohare airport
please don't waste my time with dumb questions....everything i know about the motor is listed above. and please keep all real questions to PM
bump if you can vouch thank you.
new oil pump when block was built (about 10k miles ago)
timing cover
crank pulley
alternator
water pump
timing belt
included is an oilpan but would recommend replacing it due to a large dent
Lightweight flywheel USED
Was built buy a fellow tech at my dealership and it was in his brothers daily driver for about a year then he got rearended and parted it out (motor ran fine when pulled). i bought the motor to put into my daily but i got rid of it before i swapped...so now its for sale
$300 pretty firm
Also can include a z6 head (was on it when it was running) but i removed it to do headstuds. but never completed the job
$75 for the cyl head (rebuilt the same time as the block)
comes with intake manifold (pretty bare)
valve cover
Can include dizzy +wires for another $40
located in chicago area ...willing to meet up within 30 min of ohare airport
please don't waste my time with dumb questions....everything i know about the motor is listed above. and please keep all real questions to PM
bump if you can vouch thank you.
Last edited by Lewy. Dee Ayy; Aug 17, 2011 at 07:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
user 98292739
Classifieds: Forced Induction
9
Jun 8, 2008 09:44 AM
