NC: 1999 JDM B16 Longblock w/ mildly ported head
Thread Starter
Honda-Tech Member
Joined: Feb 2004
Posts: 1,926
Likes: 2
From: That's the wrong tone... I'm Skunk2 certified.
NC: 1999 JDM B16 Longblock w/ mildly ported head
Name: Jonathan
Location: Jacksonville, NC
Contact: PM or txt/call nineonezerofivefoursixeightsevenfourone
Trades: Sorry, no trades.
I may separate the head from the block...
Hey guys, I've got a complete B16A in pretty good shape. It's a '99 JDM (185hp, 8200 redline, 10.6:1 compression) All the internals look pretty clean.
Comes complete with throttle body (60mm), intake manifold, valve cover, distributor, injectors, cams, both pumps, timing belt & tensioner, oil & water pumps, oil pan, alternator, plug wires, etc.
Everything turns freely. The compression test looked good. The chambers have been inspected with a videoscope. The cylinder walls, chambers, pistons, valves etc. all look good. The head has a fresh resurface, complete with new head gasket, and newer valve cover/spark plug gaskets. The head has also been mildly ported, mainly to get rid of the casting flaws in the ports. Nothing too crazy, but it will probobly help airflow out quite a bit. The oil passage casting flaws near the cams and rockers have been cleaned up, also.
$850...
If you're interested, let me know. Thanks for looking!
Bump plz
-Jon
Location: Jacksonville, NC
Contact: PM or txt/call nineonezerofivefoursixeightsevenfourone
Trades: Sorry, no trades.
I may separate the head from the block...
Hey guys, I've got a complete B16A in pretty good shape. It's a '99 JDM (185hp, 8200 redline, 10.6:1 compression) All the internals look pretty clean.
Comes complete with throttle body (60mm), intake manifold, valve cover, distributor, injectors, cams, both pumps, timing belt & tensioner, oil & water pumps, oil pan, alternator, plug wires, etc.
Everything turns freely. The compression test looked good. The chambers have been inspected with a videoscope. The cylinder walls, chambers, pistons, valves etc. all look good. The head has a fresh resurface, complete with new head gasket, and newer valve cover/spark plug gaskets. The head has also been mildly ported, mainly to get rid of the casting flaws in the ports. Nothing too crazy, but it will probobly help airflow out quite a bit. The oil passage casting flaws near the cams and rockers have been cleaned up, also.
$850...
If you're interested, let me know. Thanks for looking!
Bump plz
-Jon
Last edited by full Circling; Aug 7, 2011 at 03:50 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
full Circling
Southeast (Sales)
4
Aug 18, 2011 10:49 PM
full Circling
Southeast (Sales)
15
Aug 16, 2011 05:08 PM
