88crxsir's GARAGE SALE!............... help fund my ek project! (TAKE A LOOK!)
Thread Starter
Joined: Oct 2003
Posts: 5,539
Likes: 0
From: J D M, CA, usa
88crxsir's GARAGE SALE!............... help fund my ek project! (TAKE A LOOK!)
Sup my HT homies! now is the time for me to start making a serious attempt at building my hatchback again. it's been sitting at the bodyshop for the last 2 years & it's time to either finish it or get rid of it. 3 cars is too much of a hassle, but i can't seem to make a choice as to which one i should get rid of. i guess the plan is to part out some of each car to cut corners & fund the ek build. my wife & i are trying for another baby so it's now or never w/ this car.
PLEASE BUMP IF VIEWED!!!
UPDATE! 8-19-11 NEW PARTS ADDED
88-95 civic, crx, del sol Wilwood dynalite 11" big brake kit!
wilwood calipers, 2pc wilwood drilled/slotted rotors, wilwood SS braided lines.
bought this kit from fastbrakes.com for $750. only 250 miles on the kit! *MINT!
PRICE: $600 picked up!
PICS: will post up current pics ASAP! the kit is still on my car which isn't being driven either!
the kit came shipped like this
99-00 CTR CW SIDESKIRTS $150
reference pic, but i did pick up my parts from N1 concepts in this same condition. i have receipt.
99-00 CTR CW GRILLE $120
needs to be painted again, i can have it redone for a good price, PM ME!
referance pic, but i did pick my parts up from N1, about the same condition though.
99-00 CTR CW FRONT BUMPER W/ LIP $250
needs to be painted again, very minimal bodywork. i can have it redone for a good price, PM ME!
referance pic, but i did pick my parts up from N1, about the same condition though.
99-00 CTR BLK REAR BUMPER W/ LIP $300
this is off CRE18's hatchback, in very good condition! i can have it redone for a good price, PM ME!
04' TSX K2A2 longblock 70k miles!! this motor was out of an automatic so you know it wasn't abused!
it was a warranty replacement motor from ACURA, some older lady's TSX. from what i was told the motor just bent a valve. no damage to anything else. not sure why they decided to replace the whole motor, but it was fully inspected & built by Rcrew. i have a friend who will vouch for this motor being built as well as a bill of sale with it & legit VIN plate is in tact-# JH4CL96944C009754
CHECK FOR YOURSELF, JUST ENTER THE VIN.
https://www.nicb.org/theft_and...check
************* Might consider trades, show me what you got! *******
here is what i spent:
04' k24A2 longblock......$2000
NEW k20a oil pump/modified.....$150
NEW Blox valves & valve job....$400
assembly.....................$250
NEW acura OEM headgasket.....$100
NEW ARP headstuds..............$150
NEW Rcrew stage2 camshafts & supertech valvetrain......$900
ITR valve cover/painted...................$100
TOTAL: $4000 is what i spent, MAKE OFFER!
* keep in mind all the parts were slightly discounted price!
MAG BLUE shaved K20 valve cover w/ Rare AEM spark plug cover $375
CNC machined aluminum COP coil plate $150
OEM B series spark plug cover $30
** SPOON / CH combo sold!**
BLOX 6speed shift **** w/ shift extender $60
96-00 Civic type K (dark grey) center console $25
95 jdm SiR II b16a cams, 60k ish miles $30
Brand new PR3 cam gear cover $15
JDM EF8 SiR VIN blue badge ONLY!, other stuff is SOLD already! $25
NEW 0bd1 270cc injectors fully polished! $110
*DISCONTINUED/ RARE* hyper industires HID plasma xenon 1157 bulbs, there is not any other corner/bumper bulb out there that can match these!! A PERFECT MATCH to your EK9/ ITR headlights. color hue is 6k, bulbs are 100 watts!$80
NUFORMZ block guard $20 SET of 4 spacers SOLD
PLEASE BUMP IF VIEWED!!!
UPDATE! 8-19-11 NEW PARTS ADDED
88-95 civic, crx, del sol Wilwood dynalite 11" big brake kit!
wilwood calipers, 2pc wilwood drilled/slotted rotors, wilwood SS braided lines.
bought this kit from fastbrakes.com for $750. only 250 miles on the kit! *MINT!
PRICE: $600 picked up!
PICS: will post up current pics ASAP! the kit is still on my car which isn't being driven either!
the kit came shipped like this
99-00 CTR CW SIDESKIRTS $150
reference pic, but i did pick up my parts from N1 concepts in this same condition. i have receipt.
99-00 CTR CW GRILLE $120
needs to be painted again, i can have it redone for a good price, PM ME!
referance pic, but i did pick my parts up from N1, about the same condition though.
99-00 CTR CW FRONT BUMPER W/ LIP $250
needs to be painted again, very minimal bodywork. i can have it redone for a good price, PM ME!
referance pic, but i did pick my parts up from N1, about the same condition though.
99-00 CTR BLK REAR BUMPER W/ LIP $300
this is off CRE18's hatchback, in very good condition! i can have it redone for a good price, PM ME!
04' TSX K2A2 longblock 70k miles!! this motor was out of an automatic so you know it wasn't abused!
it was a warranty replacement motor from ACURA, some older lady's TSX. from what i was told the motor just bent a valve. no damage to anything else. not sure why they decided to replace the whole motor, but it was fully inspected & built by Rcrew. i have a friend who will vouch for this motor being built as well as a bill of sale with it & legit VIN plate is in tact-# JH4CL96944C009754
CHECK FOR YOURSELF, JUST ENTER THE VIN.
https://www.nicb.org/theft_and...check
************* Might consider trades, show me what you got! *******
here is what i spent:
04' k24A2 longblock......$2000
NEW k20a oil pump/modified.....$150
NEW Blox valves & valve job....$400
assembly.....................$250
NEW acura OEM headgasket.....$100
NEW ARP headstuds..............$150
NEW Rcrew stage2 camshafts & supertech valvetrain......$900
ITR valve cover/painted...................$100
TOTAL: $4000 is what i spent, MAKE OFFER!
* keep in mind all the parts were slightly discounted price!
MAG BLUE shaved K20 valve cover w/ Rare AEM spark plug cover $375
CNC machined aluminum COP coil plate $150
OEM B series spark plug cover $30
** SPOON / CH combo sold!**
BLOX 6speed shift **** w/ shift extender $60
96-00 Civic type K (dark grey) center console $25
95 jdm SiR II b16a cams, 60k ish miles $30
Brand new PR3 cam gear cover $15
JDM EF8 SiR VIN blue badge ONLY!, other stuff is SOLD already! $25
NEW 0bd1 270cc injectors fully polished! $110
*DISCONTINUED/ RARE* hyper industires HID plasma xenon 1157 bulbs, there is not any other corner/bumper bulb out there that can match these!! A PERFECT MATCH to your EK9/ ITR headlights. color hue is 6k, bulbs are 100 watts!$80
NUFORMZ block guard $20 SET of 4 spacers SOLD
Last edited by 88crxsir; Aug 20, 2011 at 12:42 AM.
Junior Member
Joined: Dec 2008
Posts: 1
Likes: 0
Re: 88crxsir's GARAGE SALE!............... help fund my ek project! (TAKE A LOOK!)
hey bro are those injectors still for sale and would i need to tune my ecu if i slap those on or well it run fine like if they was oem injectors.
Thread Starter
Joined: Oct 2003
Posts: 5,539
Likes: 0
From: J D M, CA, usa
Re: 88crxsir's GARAGE SALE!............... help fund my ek project! (TAKE A LOOK!)
sup man, yeah i still got them! they are oem ones that were fully rebuilt 100% from a reputable shop. i have the paperwork on them too, they are 270cc, but can actually pump out almost 340cc at a higher fuel psi. the paperwork shows a flow chart w/ those ranges on it. they will work just fine on a stock motor & will do even better if you add bolt on's, cams, etc. they will work even better w/ upgrades & you should retune if you add upgrades anyways, thats the best way to get your moneys worth out of upgrades. adjustable fuel equipment would be really great w/ these too! but again you can use them either way!!
Trending Topics
Thread Starter
Joined: Oct 2003
Posts: 5,539
Likes: 0
From: J D M, CA, usa
Re: 88crxsir's GARAGE SALE!............... help fund my ek project! (TAKE A LOOK!)
yeah still got them! yeah obd1! they are oem 270cc & i beleive they are high impedence since they are not not obd0, thats why the use that injector resistor box cuz they are low imp.
Thread
Thread Starter
Forum
Replies
Last Post