PA 2001 low miles full-race JDM integra
Vehicle: 2001 Acura Integra GS-R 34,000 Original miles 500 WHP
Car is located in Butler Pa 45 min from Pittsburgh
I hate to even post this for sale but time has come and getting a new place so something has to go. The car shows for itself that it has never seen snow barley rain and garage kept all its life.Also the car was just fresh rebuilt 2 months ago with new rings, rods, head gasket,OEM oil pump water pump and gaskets I have reciepts for all parts . Sorry about the low quality pictures I can provide more if needed. I am only looking for serious buyers only so if there is any questions please call me direct I can PM my phone number. Also im sure there is a few small things I left out but like I said I would rather talk direct if interested thanks for looking.Also theres a link to the video from a few months ago at evans-tuning for a update and dyno tune. Jeff can alos vouch for the car he has tuned the car since day 1
Starting price is 13,500 . The ONLY thing I would be interested in trade is a clean S2000 plus cash
Current Mods:
Engine:
84.5mm Golden Eagle Sleeved B18C1
84.5mm 9:1 Wiseco Pistons
Manley Rods
Itr cams
Full Race Cam Gears
Full Race Turbo Manifold
Full Race Down Pipe
Full Back-Door Intercooler and piping
Garrett GT3040R Turbo
Tial 40mm wastegate
Tial 50mm Blow off valve
Thermal 3” Exhaust
JG Edlebrok Intake manifold
Injector dynamics 1000cc
AEM Fuel Pressure Regulator
Walbro 255lph Fuel Pump
MSD Coil
MSD Distributer Cap
JDM Valve Cap
JDM Oil Cap
FAL Fan
Turbonetics Radiator
Drivetrain:
Quiafe LSD
RPS Carbon / Carbon clutch
RPS 12lb Carbon flywheel
Gator Stage 3 modified axles
Energy suspension shifter bushings
Suspension / Brakes / Wheels / Tires:
Tein Type Flex Coilovers
Neuspeed front upper strut tower brace
Cusco rear upper strut tower brace
Carbing front lower tie bar
Carbing rear lower tie bar
ITR 22mm Rear sway bar w/ beaks mounting kit
Full Race Traction bars
Wilwood 12.2” front rotors with 4 piston calipers
Fast Brakes 11” rear rotors with stock calipers
Earls Stainless Steel Brake lines
16” SSR Compeitions
Electronics:
Hondata s 300
P28 ECU
Evans-tuning boost by gear
3 Bar Map Sensor
Defi Boost Gauge
Defi EGT Gauge
Defi Controller
Aem wide band
Philips 4300K HID’s
Exterior:
OEM JDM Conversion
JDM ITR lip
OEM Side Skirts
OEM Rear skirts
Type R rear wing
Honda Badges
Interior:
Evo 8 leather recaro front seats
Mugen Pedals
Skunk 2 Shift ****
Momo E-brake Handle
Kenwood CD/MP3 Player
Autometer dual gauge pod holder
Autometer single carbon fiber gauge holder.
Link for dyno run at Evans-tuning
http://dynos.evans-tuning.com/2011/0...-hondata-s300/











Car is located in Butler Pa 45 min from Pittsburgh
I hate to even post this for sale but time has come and getting a new place so something has to go. The car shows for itself that it has never seen snow barley rain and garage kept all its life.Also the car was just fresh rebuilt 2 months ago with new rings, rods, head gasket,OEM oil pump water pump and gaskets I have reciepts for all parts . Sorry about the low quality pictures I can provide more if needed. I am only looking for serious buyers only so if there is any questions please call me direct I can PM my phone number. Also im sure there is a few small things I left out but like I said I would rather talk direct if interested thanks for looking.Also theres a link to the video from a few months ago at evans-tuning for a update and dyno tune. Jeff can alos vouch for the car he has tuned the car since day 1
Starting price is 13,500 . The ONLY thing I would be interested in trade is a clean S2000 plus cash
Current Mods:
Engine:
84.5mm Golden Eagle Sleeved B18C1
84.5mm 9:1 Wiseco Pistons
Manley Rods
Itr cams
Full Race Cam Gears
Full Race Turbo Manifold
Full Race Down Pipe
Full Back-Door Intercooler and piping
Garrett GT3040R Turbo
Tial 40mm wastegate
Tial 50mm Blow off valve
Thermal 3” Exhaust
JG Edlebrok Intake manifold
Injector dynamics 1000cc
AEM Fuel Pressure Regulator
Walbro 255lph Fuel Pump
MSD Coil
MSD Distributer Cap
JDM Valve Cap
JDM Oil Cap
FAL Fan
Turbonetics Radiator
Drivetrain:
Quiafe LSD
RPS Carbon / Carbon clutch
RPS 12lb Carbon flywheel
Gator Stage 3 modified axles
Energy suspension shifter bushings
Suspension / Brakes / Wheels / Tires:
Tein Type Flex Coilovers
Neuspeed front upper strut tower brace
Cusco rear upper strut tower brace
Carbing front lower tie bar
Carbing rear lower tie bar
ITR 22mm Rear sway bar w/ beaks mounting kit
Full Race Traction bars
Wilwood 12.2” front rotors with 4 piston calipers
Fast Brakes 11” rear rotors with stock calipers
Earls Stainless Steel Brake lines
16” SSR Compeitions
Electronics:
Hondata s 300
P28 ECU
Evans-tuning boost by gear
3 Bar Map Sensor
Defi Boost Gauge
Defi EGT Gauge
Defi Controller
Aem wide band
Philips 4300K HID’s
Exterior:
OEM JDM Conversion
JDM ITR lip
OEM Side Skirts
OEM Rear skirts
Type R rear wing
Honda Badges
Interior:
Evo 8 leather recaro front seats
Mugen Pedals
Skunk 2 Shift ****
Momo E-brake Handle
Kenwood CD/MP3 Player
Autometer dual gauge pod holder
Autometer single carbon fiber gauge holder.
Link for dyno run at Evans-tuning
http://dynos.evans-tuning.com/2011/0...-hondata-s300/











Last edited by 12pSi; Aug 20, 2012 at 09:23 AM. Reason: New price




