Inputs on Skunk2 Springs?
Thinking about picking up some skunk2 springs for my sedan. Can I get some pictures and some inputs on the springs?
Any other suggestions on other springs or just coilovers with sleeves let me know?
Just want a nice drop that is pretty low.
Any other suggestions on other springs or just coilovers with sleeves let me know?
Just want a nice drop that is pretty low.
I bought my em1 with these springs on it already...but it had blown struts so i chose to buy koni yellow shocks to go with the springs....... The combination of the skunk2 springs and koni yellows. Is a nice one for everyday driving.....i have them set to stiffest setting but still a nice comfortable ride..stiff but comfortable.... Gives a nice drop almost flush with top of tire...........very good for a everyday driver car but not so much for lets say auto x or somethinalong those lines
Did you try Google?
http://www.google.com/search?q=civic...w=1716&bih=853
http://www.google.com/search?q=civic...w=1716&bih=853
I have the skunk2 sleeves and springs, they are way too soft if you are wanting to SLAM your car, but for a mild drop like 1.5-2" they are pretty comfortable.
Here's my car slammed:
Here's my car slammed:
Damn tats a nice as ****ing dropp. Exactly what i want. not to low or not to high. n was thinking about a spoon lip so it'll make it look lower. but might go with the SIR lip. Doing it to my ek sedan.
you'll definitely want higher rated springs, my car is barely driveable when it's slammed like in the picture.
"not too low, not too high"
lol, the perches were set as low as they'll go, 3" from the ground to the pinch welds is lowwww
"not too low, not too high"
lol, the perches were set as low as they'll go, 3" from the ground to the pinch welds is lowwww
Trending Topics
I understood his comment. maybe i just wrote it down wrong. but i like the drop. but will def be looking for better spring rate for the sedan. might just go for some GC. then later get some koni yellow.
You can't get GC and later get koni yellow. The GC sleeve must be koni-specific.
Save your money and buy the kit when you have it. Be patient.
Save your money and buy the kit when you have it. Be patient.
If my car was that height I would swear I'd be in a brand new Cadillac or something! I'm just so used to the shitty feeling ride that when I get in anything near stock height it feels AMAZING. I just raised my car up about an inch, so Im not tucking so much tire, and it changed the ride pretty drastically, still sorta bouncy and soft but way more comfortable.
Well, and believe it or not a car that's not slammed actually handles a lot better. There is a point were ride height becomes detrimental.
Aesthetic qualification is subjective observation. You can't just ubiquitously claim that X is best. Not when there are plenty of people who disagree, like me.
Excessively lowered cars to me scream "I'm trying really hard to look cool."
To me a car shouldn't have to try so hard to get noticed. And to me there is beauty in subtlety and modesty. It's just personal opinion.
Excessively lowered cars to me scream "I'm trying really hard to look cool."
To me a car shouldn't have to try so hard to get noticed. And to me there is beauty in subtlety and modesty. It's just personal opinion.
I have skunk2 slip on's, and I hate them.
I am lowered about 2.5'' and I have trouble from time to time. dragging my lip/murdered my mudflaps.lol
Deffinetly just hold on until you can afford a nicer setup, your car/your back will thank you.
Thread
Thread Starter
Forum
Replies
Last Post
notkobashi
Acura Integra
5
Aug 14, 2010 11:42 PM




