Hey guys I hit a curb in my acoord on the passenger front tire,

I have replaced the lower control arm, Radius rod and bushings, and tie rod

Now after all that my tire still sits very angled like I have way to much camber and drives like crap, I cannot see anything else that looks bent or damaged, Seems like the problem still lies in the lower control arm

Hoping someone else might have had this problem or have some info on what else could be messed up, I did notice it looks like my rear crossmember has been pushed towards the driver side just a hair

Any Ideas and thank you in advance

 

Did you take it to the alignment shop? The last time I hit a curb, the alignment shop put shims to bring the tire within a degree.

 

Personally, I would take it in. Alignment is one of the few things I wouldn't try myself.