Pickup preferred in Southern California near Pasadena. I go by the same username on cb7tuner and have sold quite a bit recently with good feedback Buyer pays paypal fees if that's their choice of payment. All other forms of payment will require a waiting period to clear (checks, money order etc.). Please email me at goddrivvenaccord@gmail.com for a faster response

Rear strut tower bar $100

PICTURES up of fogs, AEM, and more

Like the title says:
Link to video
(turn down your speakers, sorry the air compressor was on)
Full stainless steel
mandrel bends
2 1/2 inches from the header back
Magnaflow hi-flow catalytic converter
Borla muffler
^seriously awesome exhaust, fully custom built (and done right). Perfectttttt for a Bisimoto Header (what I had in mind when I had it fabricated) or any other header (right now it's connected to a stock header)
$800 + your header-to-cat exhaust
we can work out shipping (maybe greyhound, maybe delivery/meeting if you're within 500 miles)


G Force Helmet used once $219


Autopage C3 RS900 with COMPLETE install kit and extra sensors (tilt, etc.) backup battery, tons of piezo alarms (see the pictures!) $325

4 cleaned and balanced injectors for $90


AEM V2 Intake + Filter
I stripped it to bare metal, used bondo to clean up any dings and scratches, and then sprayed it with a thick coat of black wrinkle paint. Came out perfect except where I touched it(fingerprint sized smudge, hardly noticeable). $250


Neuspeed upper strut bar (black)
It's in good condition, obviously the paint has scratched off where it mounts to the shock tower, but other than that it looks almost 10/10 when installed on the car and makes a world of difference in handling. $110 and if you need help installing it I'd be glad to (remind me and I'll give you a couple cable-ties to keep the power steering line from transferring noise through it). 110!


Hawk HPS pads for the rear brand new $50

Hawk HPS pads for the front ~95%+ life $50

5th gen Accord drivers side axle for 5 lug (used 1,200 miles) $60

Stainless steel brake lines (I believe they are manufactured by tecna-fit, or another quality company; not made in China). One brake line does have a nick in the outer teflon(plastic) coating but throughout its use it never changed/got bigger or gave me any problems/worries $75


ARP Wheel Studs x 10 $30

40/40 prop valve $25


Generic front pads for 1997-2001 Honda Prelude $20


Rear mudflaps $20


Black Dash Mat $15
Sun shades $10

Bosch 3323 oil filters. 2 brand new in box I got for an oil change special at Autozone. AKA bosch 3300 AKA Premium Guard # v4612/v4610/v4459. $7 ea or both for $12 (these will work on the Accord which is a 4459 (the 4459 has been superseded by the 4612 if I am not mistaken)


ATE Typ 200 Brake Fluid, recently opened and used to top off my reservoir (almost full) $8


Also forgot that I have a brand new in box set of 92-93 foglights! The original Honda box is pretty beat up but the lights are perfect. Comes with: Lights, Brackets, Brand new rubber trim, HOEM Manual, Brand new switch, HOEM 29H relay, & mounting hardware $400


11 inch by 3 inch Broadway style convex mirror $10 has a very faint hairline scratch that can alone be seen from an extremeeeee angle but I try to fully disclose everything *pending

All shipping is actual cost from 91108

Will consider trades for:
iPod/ipad 32gb or more
Dre's Detox album:D

 

bump

 

ttt, quality stuff!

 

im tempted to pick up the arp wheel studs

 

Bumppppp

 

They are so beautiful... they are made only with the finest ARP mined steel in Kazakhstan... only 1 in every 1,000 studs made passes inspection for sale. You are essentially getting 10,000 studs for $30, what. a. steal.

 

 

Bump