WTT: 96 civic sedan lx
just testing water so see whats out there.
$2400
i have a 96 civic lx sedan with 174xxx miles..5 speed...completely stock. there are no dents on the car, just dings. but there is rust on the back..not that bad though. ALSO has a rare power sunroof. new 2 inch piping done by beyoond engineering about a month ago. looking to trade for civic swaps or integras.



$2400
i have a 96 civic lx sedan with 174xxx miles..5 speed...completely stock. there are no dents on the car, just dings. but there is rust on the back..not that bad though. ALSO has a rare power sunroof. new 2 inch piping done by beyoond engineering about a month ago. looking to trade for civic swaps or integras.



Last edited by lwmmuas; Jun 30, 2011 at 02:47 PM. Reason: new title
Hey,
I've got a 1995 Honda Civic Coupe with a few modifications;
Honda B16A2 - I replaced head gasket and timing belt under 10k miles ago
DC Header
Magnaflow Exhaust (I think) pretty big, catless, and has a removable silencer
Warm air intake (not sure on brand)
New Distributor and Wires
V-AFC 2
P28 ECU running Chrome, and wired for datalogit, current map is stock European B16a2 on a Moates Ostrich
BRAND new radiator, 1 year old CV joint
2 week old 02 sensor,
Cheap Suspension -
Egay Coilover sleeves
450 lb/in front springs
550 lb/in rear springs
Power - Sunroof, Locks, Windows, Mirrors
Depo Foglights
APC or some brand of projector low beam black housing headlights
It's multiple colors and pretty ugly right now, but I have lots of parts for it including
B16a2 block
crower H beam rods
all new seals, gaskets, and internals (except pistons) for the engine, head studs i believe, DSM 450cc injectors, DSM resistor pack, spare intake manifold, AEM or similar fuel rail, 17 in wheels with kumho ecsta tires,
The front bumper is cracked
Here is a link to what it looked like with the wheels on it.
http://www.freewebs.com/red91sit/civ...rontwheels.jpg
keep in mind, right now, it's mostly black with a blue bumper and red bottom half
I've got a 1995 Honda Civic Coupe with a few modifications;
Honda B16A2 - I replaced head gasket and timing belt under 10k miles ago
DC Header
Magnaflow Exhaust (I think) pretty big, catless, and has a removable silencer
Warm air intake (not sure on brand)
New Distributor and Wires
V-AFC 2
P28 ECU running Chrome, and wired for datalogit, current map is stock European B16a2 on a Moates Ostrich
BRAND new radiator, 1 year old CV joint
2 week old 02 sensor,
Cheap Suspension -
Egay Coilover sleeves
450 lb/in front springs
550 lb/in rear springs
Power - Sunroof, Locks, Windows, Mirrors
Depo Foglights
APC or some brand of projector low beam black housing headlights
It's multiple colors and pretty ugly right now, but I have lots of parts for it including
B16a2 block
crower H beam rods
all new seals, gaskets, and internals (except pistons) for the engine, head studs i believe, DSM 450cc injectors, DSM resistor pack, spare intake manifold, AEM or similar fuel rail, 17 in wheels with kumho ecsta tires,
The front bumper is cracked
Here is a link to what it looked like with the wheels on it.
http://www.freewebs.com/red91sit/civ...rontwheels.jpg
keep in mind, right now, it's mostly black with a blue bumper and red bottom half
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hoodwinked
Vehicles for sale
13
Jun 9, 2004 09:12 PM




