ok i have 90 dx hatch with a b16a swap and today my dizzy went to **** on me so i hunted a new one down which took forever but i got one and my dizzy before and the new one are both wired for external coil which i have a blaster2 in it but they took the thick black and yellow wire on the wire harness its self and ran it to the possitive on the coil and then did the same thing with the black and yellow wire from the dizzy then they took the green and yellow wire from the inside of the dizzy and cut it and ran it straight to the coil also! now my new dizzy is wired the correct way and now i have no idea what goes where! if anyone can help me asap that would be great cause i have to go in the morning and get started on the damn thing! thanks in advance!