I think of doing a radiator tuck in my turbo car. If that then i need to find a fan like in the 6" range. but i need a powerful one to be able to cool it down. other wise it no use. So any advice would work great thank you.

 

Try a atv fan.

 

Good luck, no way a 6" fan is going to cut it on a street car on gas. Assuming this is a street car on gas.

 

Well i have been only driving this at the track. i havent really drive this on ths street now i put to put it on q16 all the time so no street drive. it a track car now. so what you think i can do?

 

you could do it if its a race only car....but hell you might as well not even use a fan at that point if you only have room for a 6"

 

Intrested in what you find since i myself will need a small fan heres a pic of the radiator i'll be running

 

tIt is getting transforming to a drag car only. I was thinking maybe i just need to put a elect. water pump. maybe that would help it some.

 

Man that even smaller then mine lol

 

Do yall think if i put a electirc water pump on it will help?

 

What kind of radiator do you have? Remember a fan shroud is very important with a strong fan. Honestly Tony has a custom shroud and spal fan that flows almost 2000 cfms i believe. Its made to mate with a koyo, however i have a pwr and did very little mods to make it fit. Let me tell you...its amazing how cooler my car stays with this setup. Serious it did just as good if not better than my electric pump i ran last year, which seized twice and caused me a motor. old setup i had the fan wired to be on the whole time, this setup we had to keep unplugging it to warm the car up. So we rewired it to a relay to come on at 175. Its was a night and day difference to my setup.

 

make a shroud like the T1 setup and be done with it.. works well