I recently just purchased a pair of 22" slicks . 8" with +4 offset wheels.

I have old school Neuspeed 2.25" race springs with KYB one-way shocks. I don't want to buy coil overs right now and I came across a decent deal on the slicks

Here's my car with a B-swap and 205/50/R15's. No issues and these are 23" (give or take .01") So I should have a 1/2" more in clearance to clear these +4 offsets :confused:

It is getting a K-swap in a month but has no motor now.....so I cannot test it

I figure I'm a 1/4-3/8" tucked into the fender.

hoping to here from guys who are lower than me and you can set my mind at ease

 

You'll be fine I used h and r lowering springs with 22x 8 x 15 in slicks with plenty of room

 

the slicks (tires) dont have offset, wheels do. can you give full specs on the wheels they are on. diameter and width? if they stick out too far, the fender may rub.

 

13X8 with a +4 offset wheels