So I'm looking into a 5 lug conversion on my 95 accord ex. At the local salvage yard we have a 98 accord v6 and a 5 lug odyssey. Will the 98 accord parts fit would be pulling the front knuckle and rear knuckle i know all i need is the rear hubs or would it be easier to use the odyssey's parts?

 

get the odyssey parts. the 6th gen v6s are really hard to tell if you have the right one. The LX will not work but the EX will from the 6th gen v6.

 

thank you so as long as the 6th gen is an ex it will work correct

 

best bet, for your accord is to get the 95-98 odyssey front knuckles, then order the 97+ prelude rear hubs. order 98 integra type r rotors front and rear. 23t caliper bracks for the front with accord wagon/odyssey/type r calipers.

 

To my knowledge, yes.

Remember that the LX has a completely different knuckle though.


This guy found out the hard way:

http://www.cb7tuner.com/vbb/showthread.php?t=146386

This with the exception for RSX rear rotors. I think ITRs work but why chance it when the RSX has been proven. Some people had issues with the ITR.

 

i ordered my rotors in a set. never hear of people having problems. what was the issue?

are both rotors the same size?

 

lol at 5 lug drums