FS : 88 CRX SI Parts/ Slick
Thread Starter
Honda-Tech Member
Joined: Mar 2005
Posts: 448
Likes: 0
From: Green Bay, WI, USA
FS : 88 CRX SI Parts/ Slick
FS: Silver Rota Attacks w/ MT Slicks
( 2 ) 15 x 6.5 w/ 40mm Silver Rota Attacks w/ Mickey Thompson Drag Slicks. Drag’s are for track use only!!! Had 10 runs on these slicks so they are practically brand new! They knocked my time down .4! They are super light and ready to be used! Need these gone ASAP! Might be willing to trade for a set of rims w/ no tires.
$300 obo
Call me/ text me at 920-819-5137 with any ?’s.
FS: 1988 CRX SI Parts
1. 2.5’’ crushed exhaust piping from exhaust pros with a true 2.5” street legal high flow cat.
- Had to cut off the vehicle because it was a once piece. Can be easily welded back together with no problem
2. Ebay headers with 2.25” collector. Flange was adjusted to fit the exhaust system above. Was professionally welded and the gray stuff is weld thru primer.
****** $100 OBO for Both *******
3. Exedy Stage 2 clutch w/ Pressure plate 50 miles . OEM 88 CRX si flywheel. Comes with new pilot bearing, pressure plate bolts, alignment tool, flywheel bolts and starter.
5. 88 CRX SI Uncut harness w/ OBD 0 - OBD1 Dizzy adapter plugs from xenocron w/ injector resistor box and alternator.
******** $100 OBO **********
6. 88 CRX SI Complete Intake manifold with gasket. Only 50 miles on the gasket. 150,xxx miles on the I/M.
******* $75 OBO ********
ANY ?'s just call/text me at 920-819-5137
( 2 ) 15 x 6.5 w/ 40mm Silver Rota Attacks w/ Mickey Thompson Drag Slicks. Drag’s are for track use only!!! Had 10 runs on these slicks so they are practically brand new! They knocked my time down .4! They are super light and ready to be used! Need these gone ASAP! Might be willing to trade for a set of rims w/ no tires.
$300 obo
Call me/ text me at 920-819-5137 with any ?’s.
FS: 1988 CRX SI Parts
1. 2.5’’ crushed exhaust piping from exhaust pros with a true 2.5” street legal high flow cat.
- Had to cut off the vehicle because it was a once piece. Can be easily welded back together with no problem
2. Ebay headers with 2.25” collector. Flange was adjusted to fit the exhaust system above. Was professionally welded and the gray stuff is weld thru primer.
****** $100 OBO for Both *******
3. Exedy Stage 2 clutch w/ Pressure plate 50 miles . OEM 88 CRX si flywheel. Comes with new pilot bearing, pressure plate bolts, alignment tool, flywheel bolts and starter.
5. 88 CRX SI Uncut harness w/ OBD 0 - OBD1 Dizzy adapter plugs from xenocron w/ injector resistor box and alternator.
******** $100 OBO **********
6. 88 CRX SI Complete Intake manifold with gasket. Only 50 miles on the gasket. 150,xxx miles on the I/M.
******* $75 OBO ********
ANY ?'s just call/text me at 920-819-5137
Last edited by TYPEcRx; Jun 28, 2011 at 04:19 PM. Reason: No contact information
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
