3 day sale!!! K20, SSR, B16 Quaife
Thread Starter
Joined: Sep 2002
Posts: 7,600
Likes: 2
From: Los Angeles, CA
3 day sale!!! K20, SSR, B16 Quaife
Edit -- Gonna let this run a little longer since I lost my *** in Vegas. Make offers and feel free to check out my other posts as well. I have tons of stuff for sale and need to get rid of some of it soon.
I'm only gonna leave this thread up til Thursday. I need some quick cash so I'm posting this up to sell fast. Descriptions will be at bottom. Thanks.
Brandon. Text me if seriously interested. 214-766-2517.
K20z3 motor -- $800 firm
B16 trans w/ Quaife LSD and all new bearings -- SOLD!!!!!
SSR Type C's - White and all original - 15x7 +42 - Falken Ziex 512's -- $1100
Ken's Custom Chassis 10 point chromoly weld in roll cage for 92-95 Civic Hatch -- $775
Descriptions:
I have a K20Z3 for sale. Out of an 07 Si with approx 70k on it. I have motor, harness, clutch, flywheel, etc. No Transmission!
Story behind it. Motor will probably need new cams, vtc gear, and have the journals looked at by a machine shop. It was not maintained and had a cam seize. Bottom end should be fine, however I was going to rebuild the whole thing. I'm out of funds and time since I'm too busy at the shop. Motor has a brand new timing chain, has injectors, intake manifold, valve cover, plastic top cover, clutch, flywheel, etc. Does not have transmission or ignition coils.
B16 hydro Transmission with Quaife LSD. All new bearings approximately 30 miles ago. No Grinds, Shifts like butter with absolutely no issues. Small hairline crack by snap ring on casing w/jb weld. Does not leak. New OEM diff/axle seals and detent plungers and *****/springs.
SSR Type C's 15x7 +43. Has 95% new Falken Ziex 512's 205-50-15's. Wheels are White in color and 4x100. Very rare and hard to find in this size/color. One wheel has a super slight bend (barely noticeable and does not affect balance) and a couple have a few scratches/rash on the outer lips. Original Valve Stems and caps and Original Stickers! These could definitely use a good cleaning
Ken's Custom Chassis 10 point chromoly roll cage. Bought this a while back, never got around to putting it in. My car has sat for the past 6.5 years and I dont see the cage going in anytime soon so its for sale.
I'm only gonna leave this thread up til Thursday. I need some quick cash so I'm posting this up to sell fast. Descriptions will be at bottom. Thanks.
Brandon. Text me if seriously interested. 214-766-2517.
K20z3 motor -- $800 firm
B16 trans w/ Quaife LSD and all new bearings -- SOLD!!!!!
SSR Type C's - White and all original - 15x7 +42 - Falken Ziex 512's -- $1100
Ken's Custom Chassis 10 point chromoly weld in roll cage for 92-95 Civic Hatch -- $775
Descriptions:
I have a K20Z3 for sale. Out of an 07 Si with approx 70k on it. I have motor, harness, clutch, flywheel, etc. No Transmission!
Story behind it. Motor will probably need new cams, vtc gear, and have the journals looked at by a machine shop. It was not maintained and had a cam seize. Bottom end should be fine, however I was going to rebuild the whole thing. I'm out of funds and time since I'm too busy at the shop. Motor has a brand new timing chain, has injectors, intake manifold, valve cover, plastic top cover, clutch, flywheel, etc. Does not have transmission or ignition coils.
B16 hydro Transmission with Quaife LSD. All new bearings approximately 30 miles ago. No Grinds, Shifts like butter with absolutely no issues. Small hairline crack by snap ring on casing w/jb weld. Does not leak. New OEM diff/axle seals and detent plungers and *****/springs.
SSR Type C's 15x7 +43. Has 95% new Falken Ziex 512's 205-50-15's. Wheels are White in color and 4x100. Very rare and hard to find in this size/color. One wheel has a super slight bend (barely noticeable and does not affect balance) and a couple have a few scratches/rash on the outer lips. Original Valve Stems and caps and Original Stickers! These could definitely use a good cleaning
Ken's Custom Chassis 10 point chromoly roll cage. Bought this a while back, never got around to putting it in. My car has sat for the past 6.5 years and I dont see the cage going in anytime soon so its for sale.
Last edited by JDMH22HATCH; Jul 19, 2011 at 05:18 PM.
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
