Jdmb20dc2's Build Thread **Warning: SLOW Build**
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 177
Likes: 0
From: Dallas,Tejas
Jdmb20dc2's Build Thread **Warning: SLOW Build**
Here is my build thread, it will be a slowly but surely thread but just figured I would make one to keep track of everything.
-Keep the negative comments to yourselves, I'm not asking your opinion so no need for it.
-This is a ballin' a TIGHT budget build but NO RICE!
PLANS:
-
I want to thank C's Paint & Body & the rest of my crew D-Town Ryders for helping me out with the car !!
-----------------------------------------------------
When i first purchased the car virgin 1994 LS 5spd - it came with the 4x4 JDM suspension and JDM steelies
I'm joking in-case someone took that serious
6K HIDs and alarm (not pictured lol)
Got the windows tinted 5% all around & did a lowered it a bit under stock height.
In between getting the tint and now i had swapped my b18b1 for a B20, no pics on that but nothing fancy.
Decided to go lower and during that process i lost a sideskirt on the road, gotta LOVE TEXAS roads! - at this point the clear has taken a toll but it stayed for the time being.
Some of my old crew - My car in the middle
For ***** and giggles i painted my stock hubcaps LIME GREEN and rocked them for a little while. - Was looking for wheels at the time.
Found a set of Slipstreams from a friend for a good price.
Got tired of the blk/blk look and traded the slips for SI's + plus cash.
When i got the SI's i had swapped suspension and raised it back up a tad but went back to slammed mode.
Cut out my hi-beam light so i can run a velocity stack connected to the intake. (NOT PICTURED)
Ended up selling my SI's to a friend to put on his EK Coupe so now i'm rocking steelies again for now.
NO PICS But replaced my beat up fenders for some OEM NHBP fenders (OEM FTW!!!)
PAINT & BODY WORK:
Working on the quater panels, they had the worst damage.
Same progress on driver-side quarter panel but no pics.
Here you can see the passenger side fender but not too good, DONT WORRY THE PLATES ARE NOT AT THE SAME LOCATION THE CAR STAYS AT, the thieves lurking can go run the plate....Need help? PublicData.com
FEW PICTURES OF MY PAINTERS TURBO EG
**paint and body work done by him as well**
More pics @ https://www.facebook.com/photo.php?f...08711782485814
The Crew
5-15-11
- Got MOST of my BLACK interior still missing the steering wheel and front seats.
TO BE CONTINUED...
-Keep the negative comments to yourselves, I'm not asking your opinion so no need for it.
-This is a ballin' a TIGHT budget build but NO RICE!
PLANS:
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
-I want to thank C's Paint & Body & the rest of my crew D-Town Ryders for helping me out with the car !!
-----------------------------------------------------
When i first purchased the car virgin 1994 LS 5spd - it came with the 4x4 JDM suspension and JDM steelies
I'm joking in-case someone took that serious
6K HIDs and alarm (not pictured lol)
Got the windows tinted 5% all around & did a lowered it a bit under stock height.
In between getting the tint and now i had swapped my b18b1 for a B20, no pics on that but nothing fancy.
Decided to go lower and during that process i lost a sideskirt on the road, gotta LOVE TEXAS roads! - at this point the clear has taken a toll but it stayed for the time being.
Some of my old crew - My car in the middle
For ***** and giggles i painted my stock hubcaps LIME GREEN and rocked them for a little while. - Was looking for wheels at the time.
Found a set of Slipstreams from a friend for a good price.
Got tired of the blk/blk look and traded the slips for SI's + plus cash.
When i got the SI's i had swapped suspension and raised it back up a tad but went back to slammed mode.
Cut out my hi-beam light so i can run a velocity stack connected to the intake. (NOT PICTURED)
Ended up selling my SI's to a friend to put on his EK Coupe so now i'm rocking steelies again for now.
NO PICS But replaced my beat up fenders for some OEM NHBP fenders (OEM FTW!!!)
PAINT & BODY WORK:
Working on the quater panels, they had the worst damage.
Same progress on driver-side quarter panel but no pics.
Here you can see the passenger side fender but not too good, DONT WORRY THE PLATES ARE NOT AT THE SAME LOCATION THE CAR STAYS AT, the thieves lurking can go run the plate....Need help? PublicData.com
FEW PICTURES OF MY PAINTERS TURBO EG
**paint and body work done by him as well**
More pics @ https://www.facebook.com/photo.php?f...08711782485814
The Crew
5-15-11
- Got MOST of my BLACK interior still missing the steering wheel and front seats.
- Complete Dash
- Center Console
- Carpet
- Cargo Cover
- Door Panels
- Back Seats
TO BE CONTINUED...
Last edited by BIGGMIKEE; May 15, 2011 at 11:33 PM.
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 177
Likes: 0
From: Dallas,Tejas
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 177
Likes: 0
From: Dallas,Tejas
Re: Jdmb20dc2's Build Thread **Warning: SLOW Build**
No more POS tan dash...
**looks like a stripped shell lol**
*EDIT* also you can see the new black carpet installed came from a PY ITR.
The dash is in now all i'm missing is front seats & steering wheel, the black makes the car feel and look alot different especially(sp?) at night with the windows up (5% all around aka hater blockers) with the amber LEDS in my dash/cluster.
I also wanna look for a double din radio with GPS to add (would be a NICE touch) . I'm also glad i got cup holders again haha sucked trying to hold a can of coke or something without a cap.
**looks like a stripped shell lol**
*EDIT* also you can see the new black carpet installed came from a PY ITR.
The dash is in now all i'm missing is front seats & steering wheel, the black makes the car feel and look alot different especially(sp?) at night with the windows up (5% all around aka hater blockers) with the amber LEDS in my dash/cluster.
I also wanna look for a double din radio with GPS to add (would be a NICE touch) . I'm also glad i got cup holders again haha sucked trying to hold a can of coke or something without a cap.
Honda-Tech Member
Joined: Dec 2005
Posts: 312
Likes: 0
From: NE Washington, USA
Re: Jdmb20dc2's Build Thread **Warning: SLOW Build**
Takata Green on Nighthawk Black Pearl? DO EET!
But do it on the J-Mag's with black bolts. Unless they're legit Mugens, then do it anyway, just with the Mugen logo in Black to match, haha!
But do it on the J-Mag's with black bolts. Unless they're legit Mugens, then do it anyway, just with the Mugen logo in Black to match, haha!
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 177
Likes: 0
From: Dallas,Tejas
Re: Jdmb20dc2's Build Thread **Warning: SLOW Build**
Yes same thing i'm thinking. Takata Green+NHBP = ****.
And they are just jmags with low offest, im not baller enough to afford Mugens
Not sure yet, them aren't my wheels.
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 177
Likes: 0
From: Dallas,Tejas
Re: Jdmb20dc2's Build Thread **Warning: SLOW Build**
Getting closer.
6-19-11
Just got to my boys shop to finish the few body repairs we have left and then getting it sanded and primered.
Car is flat black right now but no pics because i have a shitty camera and its night time.
edit: - i would have been done but didnt get any progress done for about 2weeks.
6-19-11
Just got to my boys shop to finish the few body repairs we have left and then getting it sanded and primered.
Car is flat black right now but no pics because i have a shitty camera and its night time.
edit: - i would have been done but didnt get any progress done for about 2weeks.
Last edited by BIGGMIKEE; Jun 20, 2011 at 06:09 PM.
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 177
Likes: 0
From: Dallas,Tejas
Re: Jdmb20dc2's Build Thread **Warning: SLOW Build**
UPDATE:6-20-11
Here are a few pictures of the car primer'd. Going to finish the front end Friday and going to spray it in about a week.
Here are a few pictures of the car primer'd. Going to finish the front end Friday and going to spray it in about a week.
Honda-Tech Member
Joined: Dec 2010
Posts: 36
Likes: 0
Re: Jdmb20dc2's Build Thread **Warning: SLOW Build**
What a waste ....I see alot of dreaming and no progress ...I could went to the junkyard and did all this in one day what you have done in the last 6 months...at least the primer looks good
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 177
Likes: 0
From: Dallas,Tejas
Re: Jdmb20dc2's Build Thread **Warning: SLOW Build**
