tuner2 cams and eagle rods/JE pistons
Thread Starter
Honda-Tech Member
Joined: Mar 2008
Posts: 1,729
Likes: 0
From: Ballwin, MO
tuner2 cams and eagle rods/JE pistons
tuner2 for dohc vtec on stock cam gears- 400 shipped OBO
eagle GSR rods and JE 9.0-1 pistons- 400 shipped OBO
one piston will need new rings, whoever installed them in the gsr bottom end i got failed at putting them in so it screwed up one of the rings, piston is still fine. 81mm pistons
one has some discolaration on it but i took a pic of the bearing as well.
eagle GSR rods and JE 9.0-1 pistons- 400 shipped OBO
one piston will need new rings, whoever installed them in the gsr bottom end i got failed at putting them in so it screwed up one of the rings, piston is still fine. 81mm pistons
one has some discolaration on it but i took a pic of the bearing as well.
Last edited by hardcore97; Apr 28, 2011 at 02:53 PM.
Thread Starter
Honda-Tech Member
Joined: Mar 2008
Posts: 1,729
Likes: 0
From: Ballwin, MO
Re: tuner2 cams and eagle rods/JE pistons
it has been brought to my attention that these are GSR rods, not ls. i verified that on an old gsr crank i have laying in the garage, also tested them on an ls crank and they are definitely GSR rods
Thread
Thread Starter
Forum
Replies
Last Post
Schister66
Classifieds: Forced Induction
10
Feb 11, 2013 07:49 PM