my first day with my turbo :)
Trending Topics
well I have a 2 stage rev limit, around 3psi on the line at 5500rpm but i think 5500 is to high... too much wheelspin...maybe my slicks are too small...
i know i have a lot of adjustement to do... car is running so rich... but , it was my first day with the turbo, and so much to tune... so i know I can do better
still a good e.t. and mph for a full load integra ?!?!
i know i have a lot of adjustement to do... car is running so rich... but , it was my first day with the turbo, and so much to tune... so i know I can do better

still a good e.t. and mph for a full load integra ?!?!
u ever think of using a two stage boost controller? lower boost out the hole and bam 10 lbs in 2nd. improve ure times real nice.
invest in some Z10 radius arms...dude in this post
https://honda-tech.com/zerothread?id=174222
sells em (shipped) for a great price.
https://honda-tech.com/zerothread?id=174222
sells em (shipped) for a great price.
Like i said i have walbro 255, 450cc dsm injectors with AEM EMS. (no fmu/fpr)
I know it was running rich, so I will be able to raise the boost a little more without problem.
I boost 10psi.
And i have forged pistons/rods. 9:1 of compression.
This was done with deconnecting the exhaust... with the exhaust my best was 13.10@111mph but I think with better 60ft i can touch the 12secondes with the exhaust on. (it's 2 1/4 inch)
I'm going to try it again this weekend, hope to do better
I know it was running rich, so I will be able to raise the boost a little more without problem.
I boost 10psi.
And i have forged pistons/rods. 9:1 of compression.
This was done with deconnecting the exhaust... with the exhaust my best was 13.10@111mph but I think with better 60ft i can touch the 12secondes with the exhaust on. (it's 2 1/4 inch)
I'm going to try it again this weekend, hope to do better
12.63@115.4
60ft : 1.89
1/8 : 8.16
only changed my 2 step rev limit ,and good shifting (tranny is finished now, so i'm loosing a lot of time/boost with slow shift) but that run was the best... my best 1/8
other run are around 8.3x on the 1/8 with my slow shift
60ft : 1.89
1/8 : 8.16
only changed my 2 step rev limit ,and good shifting (tranny is finished now, so i'm loosing a lot of time/boost with slow shift) but that run was the best... my best 1/8
other run are around 8.3x on the 1/8 with my slow shift
Yeah i like it a lot, but it's not easy like controlling a v-afc. I have to ask a lot of questions , but the msg board of the EMS is very good with a lot of support from tech from AEM.
but you can adjust it your self?? does it have a handheld emulator or do you plug it into a laptop or desktop computer??? cause i just found out you cant adjust hondata by yourself( someone correcxt me if im wrong).
Yes i can adjust it all by myself, with a lap top. Or, i can do my map on my pc, and upload it with my lap top.
For hondata, you need stage 4 and stuff to burn chip (i think) to change it yourself.
For hondata, you need stage 4 and stuff to burn chip (i think) to change it yourself.



