Need help with wiring harness.
Thread Starter
Member
Joined: Mar 2002
Posts: 4,200
Likes: 0
From: CA, USA
Need help with wiring harness.
I am getting a B18B engine swap into my 1999 Honda Civic EX and was wondering if someone had wiring diagrams of what needed to be done with the harness, I will be using the B18B engine wiring harness and the LS ECU OBDII. Just curious as to what needs to be done. Thank you.
Senior Member
Joined: May 2001
Posts: 10,753
Likes: 1
From: Where snow is, I am.
Re: Need help with wiring harness. (AresB18BTurbo)
I'd check out http://tech.hybridgarage.com/ as well as c-speedracing.com 
For using the harness from the firewall harness to the ECU, you will need to have both the 99 EX pin-outs and color codes of the harness, as well as the LS in order to convert that specific harness (from firewall to the ECU) and knock sensor will need to be added.
good luck
For using the harness from the firewall harness to the ECU, you will need to have both the 99 EX pin-outs and color codes of the harness, as well as the LS in order to convert that specific harness (from firewall to the ECU) and knock sensor will need to be added.
good luck
Thread
Thread Starter
Forum
Replies
Last Post
Rusty Shackleferd
For Sale
1
Jan 25, 2005 11:28 AM
gtowni3
Honda Civic / Del Sol (1992 - 2000)
4
Sep 26, 2004 10:05 PM