Currently DTMSPEED clutches are not sold in the U.S.

http://www.gencoupe.com/2-0t/26324-d...lutch-kit.html

Check out the review for a Hyundai Genesis coupe..

I have a brand new DTMSpeed Stage 1 Clutch for a B-Series motor that I would like someone to do a review on...

Requirements -

Reputable member on Honda-Tech
Must be able to provide a thorough review on the clutch, before/after break in..
Must be willing to fill out a small agreement to fax to the vendor of the clutch.

Also, a small fee of 50.00 USD will be charged.

Please send me PM's regarding your information..

Year, Make, Model, Motor, Supporting Mods.. ETC...

Thanks.

 

ttt

 

Only if my LS-V was done I'd see if I qualify

 

.....
00 civic hatch with b16a2. just got it installed to get bar'd. I'm about to get an intake but I'll only be able to review for daily drivability. I don't drag...and will be hitting the track this summer for some autocrossing.

 

get her done quick

 

I will let you know.

 

is it the complete setup like the link where it comes with the flywheel?

I might be interested in doing this. What's their hp rating on the clutch?

 

Sorry, it's just the clutch kit.

No flywheel.

Here are some specs.

SPEC:
Disc Ø212mm , 20T / 22mm Sprung damper
Cover Push type Clamp Load OE 375 kg.f / HD09 450 kg.f

Disc uses the ULTRA COPPERMIXED FACING (15% upgraded cover than OEM spec)



HONDA PERFORMANCE CLUTCH
Stage 1 is the product applied and participated on the following vehicles.

 

are you gonna install it

 

no sir, just supplying the clutch.

 

sell one? looking for a good clutch to put on a ek hatch with itr swap im building for my buddy who is currently deployed in s. korea

 

Im pulling my motor today and would be willing to write a review for you guys.
So this is a clutch and pressure plate or just a clutch?

Ive got a "93 Del Sol with a B16A, Daily driven, with some track days and canyon running thrown in for good messure.

The only thing is I would need to have it by today or Saturday morning at the latest.

PM me fastest response.

 

You sir have a PM.

 

I may be down for this.... I have a 90 civic sedan with an ls (re)building a trans for it at the moment type r gonna be throwing an lsd in it (usdm). If I get my valvetrain here shortly ill be able to toss in my stage 2 cams as well fully obd1 converted with skunk2 intake manifold68 mm tb. Header and 2.5" custom mandrel bent exhaust with magnaflow resonator/muffler. Koni/gc along with many suspension upgrades with plans for more as well as a new motor build with a gt45 I recently picked up. Car is a weekend car too much money in it to worry about theft as well as soon to be track who're for hpde.