Looking for a good condition open or closed deck B16 block that has the paperwork showing who sleeved and bored the block. If block has been decked, how much, and what thickness head gasket to get to listed compression. Prefer an 83 mm bore, 84 mm will work. I do not want 81.5, 82, 84.5, or 85. If it has pistons, compression must be 10:1, or 10:5 with a b16 head, brand can be CP, JE, SRP, or Wiseco only. Must have ARP main studs and been align bored.


Alternative choice is a built 18C1 or C5 block, my budget is limited so if you are going to ask more than $1800 shipped to 89012, you will just waste both our time. Also must be somewhat complete, crank, rods, pistons, I can take the rest off of my blown up b16.

If you have an 18 block I only want a VTEC block. Don't even bother me with an LS block no matter how well built it is. Must have crank(LS, GSR, Eagle are ok), forged rods and pistons. Pistons must have compression of 10:1 or 10:5 with b16 head. Looking for same sizes listed for B16 block, paperwork, 83 or 84mm bore, etc.

Please pm me with what you have.

 

i have a ls vtec fully build motor its got 10:1 compression