Spring cleaning and more (Will update frequently)
Thread Starter
Honda-Tech Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Ohio
Spring cleaning and more (Will update frequently)
Consolidating my threads to one
Lico Sparco SFi Rated shoes size 13 Retail $90 Want $35 These are new and have some dirt inside from trying them on but they are too big for me I am size 12
Decided to part out my project...
Y8 Head Complete with Valvecover 90k Miles $100
z6 Head Complete with VC 140k Miles $100
Y8 Intake Mani Automatic no sensors $20
Y8 Intake Manifold 5 speed complete with TB all sensors including injectors and rail $75
D15B JDM block assembled approximately 45k miles was in the car for a year after the swap was bought $200
92-95 Z6 Si EX ZC? Transmission came with the D15B around 45k Miles as well. Transmission reads P20-B000...EX Si? ZC??? $250
D Series Axels 2 sets ($35 a set)
D Series Shift Linkage $40
92-95 DX Front Knuckles Rotors Calipers $40
92-95 EX Front Knuckles Rotors Calipers $50
z6 Intake manifold complete with TB and sensors including injectors and rail $75
z6 stock exhaust manifold and down pipe $30
(2) P06 ECUs converted to D15B Vtecs with a Dyno tuned base map from Xenocron 5 spd $120 each
92-95 Civic EX IACV, TB with TPS and MAP $60
D15B NonVtec Dizzy looks identicle to Z6 on CYP positioning and everything $50
z6 Dizzy $40
SOHC Vtec Soleniod I have 2 $30 each
Cometic B18A/B 2.5mm Head gasket
Got this and can not use it GET IT CHEAP!
Paid $140 for it shipped, it is 2.5mm or .098" thick! 81.5mm bore
crack head price of $105+Shipping FIRM!!!
Its 5 layers 3 are .010" steel rubber coated both sides and 2 are solid stainless steel not mild steel that will rust.
Drop this on your B18A or B and drop the compression 1.2:1CR.
Accel 255cc OBD1 Injectors set of 4 $100 OBO
$69 each new At Jugs/Scummit
Also in Picture B series Fuel Rail $15 OBO
P61 Chipped ECU with knock board $150 OBO
Mugen B16 Fuel and ignition map Chip adjusted Vtak rev limit 9000RPM
Virgin OBD0 PR3 B16A ECU from Nippon Motors $100 OBO
Sealed with never opened.
NEW Fender washer and bolts.
Use them for headlights, fenders, clutch reservoirs, radiator mounts, license plates... anything on a Honda with a 10mm bolt.
CNC Machined aluminum washers, rubber anti scratch washer, Stainless hex bolt 20mm long.
$1.75 each! Buy more than 25 $1.60 EACH!
Examples Below
I know we got to have some WRX owners in here:
Before they hit eBay ill let them go cheap.
Bought them off LERSOC, 2 of the struts were blown. Sent them into Bryan at JIC and had them fully rebuilt and re-valved. Have all emails to prove the work was done. Will come with documentation. Have not been installed since rebuild, so as if they have 0 Miles on them!!!
MSRP $2500
Optional Helper springs and Includes Camber plates!
http://www.jic-magic.com/ViewProduct...CarMakeID=9#AC
Pic is pre rebuild I have not unpacked them since I got them back.
$1200 OBO Flexable on pricing!
Will be updating shortly when it gets warmer I have an EG hatch and DA teg to part out
Lico Sparco SFi Rated shoes size 13 Retail $90 Want $35 These are new and have some dirt inside from trying them on but they are too big for me I am size 12
Decided to part out my project...
Y8 Head Complete with Valvecover 90k Miles $100
z6 Head Complete with VC 140k Miles $100
Y8 Intake Mani Automatic no sensors $20
Y8 Intake Manifold 5 speed complete with TB all sensors including injectors and rail $75
D15B JDM block assembled approximately 45k miles was in the car for a year after the swap was bought $200
92-95 Z6 Si EX ZC? Transmission came with the D15B around 45k Miles as well. Transmission reads P20-B000...EX Si? ZC??? $250
D Series Axels 2 sets ($35 a set)
D Series Shift Linkage $40
92-95 DX Front Knuckles Rotors Calipers $40
92-95 EX Front Knuckles Rotors Calipers $50
z6 Intake manifold complete with TB and sensors including injectors and rail $75
z6 stock exhaust manifold and down pipe $30
(2) P06 ECUs converted to D15B Vtecs with a Dyno tuned base map from Xenocron 5 spd $120 each
92-95 Civic EX IACV, TB with TPS and MAP $60
D15B NonVtec Dizzy looks identicle to Z6 on CYP positioning and everything $50
z6 Dizzy $40
SOHC Vtec Soleniod I have 2 $30 each
Cometic B18A/B 2.5mm Head gasket
Got this and can not use it GET IT CHEAP!
Paid $140 for it shipped, it is 2.5mm or .098" thick! 81.5mm bore
crack head price of $105+Shipping FIRM!!!
Its 5 layers 3 are .010" steel rubber coated both sides and 2 are solid stainless steel not mild steel that will rust.
Drop this on your B18A or B and drop the compression 1.2:1CR.
Accel 255cc OBD1 Injectors set of 4 $100 OBO
$69 each new At Jugs/Scummit
Also in Picture B series Fuel Rail $15 OBO
P61 Chipped ECU with knock board $150 OBO
Mugen B16 Fuel and ignition map Chip adjusted Vtak rev limit 9000RPM
Virgin OBD0 PR3 B16A ECU from Nippon Motors $100 OBO
Sealed with never opened.
NEW Fender washer and bolts.
Use them for headlights, fenders, clutch reservoirs, radiator mounts, license plates... anything on a Honda with a 10mm bolt.
CNC Machined aluminum washers, rubber anti scratch washer, Stainless hex bolt 20mm long.
$1.75 each! Buy more than 25 $1.60 EACH!
Examples Below
I know we got to have some WRX owners in here:
Before they hit eBay ill let them go cheap.
Bought them off LERSOC, 2 of the struts were blown. Sent them into Bryan at JIC and had them fully rebuilt and re-valved. Have all emails to prove the work was done. Will come with documentation. Have not been installed since rebuild, so as if they have 0 Miles on them!!!
MSRP $2500
Optional Helper springs and Includes Camber plates!
http://www.jic-magic.com/ViewProduct...CarMakeID=9#AC
Pic is pre rebuild I have not unpacked them since I got them back.
$1200 OBO Flexable on pricing!
Will be updating shortly when it gets warmer I have an EG hatch and DA teg to part out
Last edited by l337h4l; Mar 14, 2011 at 10:58 AM.
Trending Topics
Re: Spring cleaning and more (Will update frequently)
i will take that t bracket as long as its not off a 99 2000 civic si. i need one off a integra. let me no how much with shipping and paypal and i will get you the money. thanks. nc 27834
Thread Starter
Honda-Tech Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Ohio
Re: Spring cleaning and more (Will update frequently)
Bump Added
Lico Sparco SFi Rated shoes size 13 Retail $90 Want $35 These are new and have some dirt inside from trying them on but they are too big for me I am size 12
Decided to part out my project...
Y8 Head Complete with Valvecover 90k Miles $100
z6 Head Complete with VC 140k Miles $100
Y8 Intake Mani Automatic no sensors $20
Y8 Intake Manifold 5 speed complete with TB all sensors including injectors and rail $75
D15B JDM block assembled approximately 45k miles was in the car for a year after the swap was bought $200
92-95 Z6 Si EX ZC? Transmission came with the D15B around 45k Miles as well. Transmission reads P20-B000...EX Si? ZC??? $250
D Series Axels 2 sets ($35 a set)
D Series Shift Linkage $40
92-95 DX Front Knuckles Rotors Calipers $40
92-95 EX Front Knuckles Rotors Calipers $50
z6 Intake manifold complete with TB and sensors including injectors and rail $75
z6 stock exhaust manifold and down pipe $30
(2) P06 ECUs converted to D15B Vtecs with a Dyno tuned base map from Xenocron 5 spd $120 each
92-95 Civic EX IACV, TB with TPS and MAP $60
D15B NonVtec Dizzy looks identicle to Z6 on CYP positioning and everything $50
z6 Dizzy $40
SOHC Vtec Soleniod I have 2 $30 each
Lico Sparco SFi Rated shoes size 13 Retail $90 Want $35 These are new and have some dirt inside from trying them on but they are too big for me I am size 12
Decided to part out my project...
Y8 Head Complete with Valvecover 90k Miles $100
z6 Head Complete with VC 140k Miles $100
Y8 Intake Mani Automatic no sensors $20
Y8 Intake Manifold 5 speed complete with TB all sensors including injectors and rail $75
D15B JDM block assembled approximately 45k miles was in the car for a year after the swap was bought $200
92-95 Z6 Si EX ZC? Transmission came with the D15B around 45k Miles as well. Transmission reads P20-B000...EX Si? ZC??? $250
D Series Axels 2 sets ($35 a set)
D Series Shift Linkage $40
92-95 DX Front Knuckles Rotors Calipers $40
92-95 EX Front Knuckles Rotors Calipers $50
z6 Intake manifold complete with TB and sensors including injectors and rail $75
z6 stock exhaust manifold and down pipe $30
(2) P06 ECUs converted to D15B Vtecs with a Dyno tuned base map from Xenocron 5 spd $120 each
92-95 Civic EX IACV, TB with TPS and MAP $60
D15B NonVtec Dizzy looks identicle to Z6 on CYP positioning and everything $50
z6 Dizzy $40
SOHC Vtec Soleniod I have 2 $30 each
Thread
Thread Starter
Forum
Replies
Last Post
Louie
For Sale
15
Mar 4, 2011 08:19 PM
