Title says it all.

We have a BNIB set of EF S2 front UCA's. When we were trying to install them my roomate did not like the fact modification was needed, so he decided not to use them. The have never been installed and were bought brand new 2 months ago from PWJDM. They do have a couple scratches from when we were mocking them up but nothing serious.

Price: 200 + shipping.

Next is a set of front and rear OEM replacement bumpers. My roommate purchased them, but wanted a 96-97 front, they sent the 94-95 instead. He has since bought bumpers and no longer needs these. They are supposedly TYC brand, and are BNIP(Plastic Packaging) They were never removed nor have they ever been on a vehicle.

Price: 75 EA + shipping, will also do a package deal for both.

Last is a brand new Forge Motorsports manual boost controller. It is 100% polished with red Samco hoses. It was installed for looks only on my buddies big turbo GTi but it was never used. We were searching the gremlins out of his motor, before we could actually install the BC and use it the 3rd motor let go, and he gave up on the project. Everything is brand new, and I can also get you different springs for it from Forge. I turned it all the way down to 0, and thats how it will be shipped.

Price: 50 + Shipping.

I can get pictures of everything, but I will not remove the bumpers from the packaging for pictures. They are exactly how we received them in the packaging.

Also PM works BEST as i will receive an email notification.

Thanks for looking,
Brandon

 

scratches^^^

 

What kind of modification is required for the UCAs? S2 doesn't have instructions up on their website for EFs, but the EGs don't require any modification.

Thanks!

 

The only modification I ran into on my 91 integer with these ucas was I had to drill the mounting holes out a little to keep from stripping the bolts. Bump for a good part