Okay,

I want to retain my a/c with my h22 swap and use the HCP a/c bracket.

So I was told I needed to remove the stock a/c condensor fan because of clearance issues with the HCP kit and h22...

So I go take it off today...

Turns out there is NOTHING holding the condensor in place (along with the lines) excpet the a/c condensor fan mounted on the condensor...which in turn holds the condensor in place.

So with this out, what the crap am I supposed to do to hold the condensor in place? What about the lines?

Everything is just dangling around in there.

I was thinking about using JUST the frame from the a/c fan..and boring everything else out, so at least there's something to hold the condensor/lines in place. Is this what I have to do?

Please help. TIA.

 

ttt