EG part out Skunk2 Darton sleeves AEM OEM parts
Just got a few things i'm trying to get out of my garage, call/text 954 554 8349
pictures of everything listed can be found here; additional pictures available upon request: Pictures by 95egjdmb20vtec - Photobucket
-Darton MID Sleeved 84mm GSR block w/ main caps and girdle, Headstud holes tapped for ARP 1/2" headstuds *Regular 7/16" headstud/bolts will not work* - SOLD
*History of this block is...I got it sleeved last year September and have been driving on it since. I believe the sleeving company accidental cracked the front of the block's coolant passage(of course they claimed it wasnt them) the leak was so small that it really didnt bother me so i drove on it for 5 months boosted, gave no problems, other than i had to occasionally refill the radiator due to the leak. The crack CAN be welded, but since i had it in the car already, and the leak was so slow, to me i just dealt with the occasional fill-up vs taking out the whole motor and stripping it*
----------------------------------------------------
-Everything in this section SOLD
or
-BBK power plus 62mm TB - SOLD
-AEM FPR - SOLD
-Skunk 2 pro series b16 Intake manifold - SOLD
-included: Stock fuel rail, fast idle valve, map sensor
----------------------------------------------------
-OEM 95 honda civic cx hatch SRS module and harness - $20
-OEM Integra ls PR4 pistons and rods - $100obo
-OEM 95 honda civic cx hatch fuel pump w/ strainer and mount - $50
-OEM A/C tensioner pully - $10
-OEM 95 civic cx hatch heater control valve w/ mounting bracket - $20
-OEM fuel filter bracket - $15
-OEM civic outside and inside door handles with rods - $15
-OEM 95 civic cx hatch complete working under dash heating/cooling system w/harness - $60
-OEM 92-92 civic A/C lines, condenser, evaporator, and fan - $ 100obo
-OEM 92-95 hatch clutch and front brake lines - $30
Parts i need:
-Hasport/Avid/Innovative engine mounts (eg with b-series)
-Edlebrock VictorX Intake manifold for b16 head
-70mm throttlebody
-aftermarket fuel rail (GE/AEM)
-aeromotive FPR
-intank fuel pump hanger for 2 walbro 255 pumps
-Aluminum radiator
-Battery box oil catch can
-EG ASR subframe
-EG rear swaybar
pictures of everything listed can be found here; additional pictures available upon request: Pictures by 95egjdmb20vtec - Photobucket
-Darton MID Sleeved 84mm GSR block w/ main caps and girdle, Headstud holes tapped for ARP 1/2" headstuds *Regular 7/16" headstud/bolts will not work* - SOLD
*History of this block is...I got it sleeved last year September and have been driving on it since. I believe the sleeving company accidental cracked the front of the block's coolant passage(of course they claimed it wasnt them) the leak was so small that it really didnt bother me so i drove on it for 5 months boosted, gave no problems, other than i had to occasionally refill the radiator due to the leak. The crack CAN be welded, but since i had it in the car already, and the leak was so slow, to me i just dealt with the occasional fill-up vs taking out the whole motor and stripping it*
----------------------------------------------------
-Everything in this section SOLD
or
-BBK power plus 62mm TB - SOLD
-AEM FPR - SOLD
-Skunk 2 pro series b16 Intake manifold - SOLD
-included: Stock fuel rail, fast idle valve, map sensor
----------------------------------------------------
-OEM 95 honda civic cx hatch SRS module and harness - $20
-OEM Integra ls PR4 pistons and rods - $100obo
-OEM 95 honda civic cx hatch fuel pump w/ strainer and mount - $50
-OEM A/C tensioner pully - $10
-OEM 95 civic cx hatch heater control valve w/ mounting bracket - $20
-OEM fuel filter bracket - $15
-OEM civic outside and inside door handles with rods - $15
-OEM 95 civic cx hatch complete working under dash heating/cooling system w/harness - $60
-OEM 92-92 civic A/C lines, condenser, evaporator, and fan - $ 100obo
-OEM 92-95 hatch clutch and front brake lines - $30
Parts i need:
-Hasport/Avid/Innovative engine mounts (eg with b-series)
-Edlebrock VictorX Intake manifold for b16 head
-70mm throttlebody
-aftermarket fuel rail (GE/AEM)
-aeromotive FPR
-intank fuel pump hanger for 2 walbro 255 pumps
-Aluminum radiator
-Battery box oil catch can
-EG ASR subframe
-EG rear swaybar
Last edited by b3st0fth3w0rst; Feb 17, 2011 at 06:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jonny-X
Northeast (Sales)
6
May 12, 2013 03:55 AM
Jonny-X
Mid-Atlantic (Sales)
1
Jan 6, 2013 07:09 PM



