This is a spare EDM foglight setup of mine, (OEM Stanley, made in Japan, but for European Hondas) all you need to do is connect the wires to any source such as from license plate light harness.

On the bulb housing, the bottom was cut out to fit without modification to the bumper support on an old project. Works 100%, doesn't affect it at all, cannot be seen, and also won't be detrimental due to weather as no water goes there.

It will fit on either left, or right side, everything flips over so this is possibly.

$125 OBO


Here is an example of cost, this is just the lens (not front or back housing for 130 shipped alone)
http://cgi.ebay.com/ebaymotors/EDM-R...Q5fAccessories

 

pm'd a little interested..