FS: Refinished DC5-R Brembo's
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 5,749
Likes: 0
From: Rhode Island
FS: Refinished DC5-R Brembo's
I originally bought these off rhdjon's DC5-R. They were in rough shape and one of the bleeders was damaged.
The one bleeder was professionally re-taped for a NPT fitting and I installed the new bleeder zinc coated housing and bleeder screw in its place. This is a COMMON problem with any aluminum calipers. People over tighten and aluminum and steel don't mix together well. While I replaced the one bleeder, I went ahead and replaced ALL bleeders with the zinc coated steel seat/screw sets. This should eliminate any issues most people have with bleeders.
These were also bead blasted and re coated with 2000 *F paint.
The brembo's come loaded with OEM DC5-R brembo pads with plenty of life left, and USED s2000 rotors.
This is EVERYTHING you need to bolt these onto a 8th Civic Si, and I believe RSX-s.
$650 + Shipping
The one bleeder was professionally re-taped for a NPT fitting and I installed the new bleeder zinc coated housing and bleeder screw in its place. This is a COMMON problem with any aluminum calipers. People over tighten and aluminum and steel don't mix together well. While I replaced the one bleeder, I went ahead and replaced ALL bleeders with the zinc coated steel seat/screw sets. This should eliminate any issues most people have with bleeders.
These were also bead blasted and re coated with 2000 *F paint.
The brembo's come loaded with OEM DC5-R brembo pads with plenty of life left, and USED s2000 rotors.
This is EVERYTHING you need to bolt these onto a 8th Civic Si, and I believe RSX-s.
$650 + Shipping
Thread
Thread Starter
Forum
Replies
Last Post
Brakemotive
Wheels, Tires, Brakes, and Suspension
18
May 16, 2009 12:04 PM
DC2*Integra
For Sale
3
Apr 3, 2004 04:13 PM
