Stainless V band flange 2.5", 3" flex pipe, 4" vbands
Thread Starter
Joined: Dec 2001
Posts: 9,091
Likes: 28
From: the internet and I WILL STEP ON YOU
Stainless V band flange 2.5", 3" flex pipe, 4" vbands
All items are stainless and brand new. They are left over from a turbo build I didnt complete.
The flange is from ATP and is able to accept a 3" or 2.5" pipe. It is a perfect match to the PTE 2.5" flange on the billet t3 turbos. ATP sells this for 39 plus shipping, id like $25 shipped
The flex pipe is also from ATP and has the braid on the inside of the pipe as well so its "double walled" and not a cheap one that will rip apart after 1k miles. ATP wants 35 plus shipping on this, I would like $25 shipped
The vbands are not atp but are of good quality. I would like $25 shipped each or $45 shipped for both
will have actual pics shortly of flex/vband flange tonight
heres the 4" vbands. this is NOT the flex i am selling, this one is 4" in the pic
flex: http://www.atpturbo.com/mm5/merchant...egory_Code=FLX
vband: http://www.atpturbo.com/mm5/merchant...Category_Code=
The flange is from ATP and is able to accept a 3" or 2.5" pipe. It is a perfect match to the PTE 2.5" flange on the billet t3 turbos. ATP sells this for 39 plus shipping, id like $25 shipped
The flex pipe is also from ATP and has the braid on the inside of the pipe as well so its "double walled" and not a cheap one that will rip apart after 1k miles. ATP wants 35 plus shipping on this, I would like $25 shipped
The vbands are not atp but are of good quality. I would like $25 shipped each or $45 shipped for both
will have actual pics shortly of flex/vband flange tonight
heres the 4" vbands. this is NOT the flex i am selling, this one is 4" in the pic
flex: http://www.atpturbo.com/mm5/merchant...egory_Code=FLX
vband: http://www.atpturbo.com/mm5/merchant...Category_Code=
Thread
Thread Starter
Forum
Replies
Last Post
BlueShadow
Classifieds: Forced Induction
6
Aug 19, 2009 04:01 PM
BlueShadow
Forced Induction
2
Jul 31, 2005 09:10 PM
theo99gsr
Forced Induction
15
Jul 3, 2005 11:17 AM
