''got emm'' crew EG hatch build
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 55
Likes: 0
''got emm'' crew EG hatch build
Hello honda tech. My bestfriend is in the process of building his EG HATCH
He said he was too lazy to make a build thread. So i decided to make one
For him. Its nice too look back at things you've spent alot of time on.
Cell phone pictures suck.. sorry Bump/Comment if viewed !
Shops Contacts
Roll cage - Dan@goJMRC.com / 540-604-0576 / Fredericksburg, Virginia
Valve cover - http://boneheadperformance.com / Warminster, PA
He picked it up in winter 2009 - 2010
Summer 2010 looking dialed. Next to my car i just picked up.
RECARO
EG6 LEATHER WHEEL / EG6 CLUSTER
September
Me Slacking Him unhooking wires getting ready to pull motor.
Motor is out.
swap sold to me
Taking off exhaust.
He got his block back. waiting for car to get finished.
OH VTEC valve cover....i recommended the color but he takes all the credit
November 2010
Bought a trailer/engine bay sand blasted
December 2010
Helping him pull up tar mat under carpet.
dry ice/2inch spackle knifes
January 14 2011
Pictures dont do justice....
Looks gooooood.
Picked up from Fredrickburg, Virgina
Jeff Morgan race cars
Phone = 540-604-0576
email = Dan@goJMRC.com
Tell him... Keith and Jack sent you.
certfied 10pt cage in it. Good work / Great price
Could have made this a lil cleaner looking.
But apparently there's a way to make it look fresh still.
Will update when we get to it.
Parachute holder welded to rollcage hole thru bumper
Can be taken off its held on by a bolt simalar to a hitch.
Drilling holes to plate to hold chute onto holder.
Putting chute onto holder.
Parachute is on.
Filling holes for a clean engine bay
Jan. 20th
THE FUN WORK
Vacumm /clean up..plenty more sanding to do.
He said he was too lazy to make a build thread. So i decided to make one
For him. Its nice too look back at things you've spent alot of time on.
Cell phone pictures suck.. sorry Bump/Comment if viewed !
Shops Contacts
Roll cage - Dan@goJMRC.com / 540-604-0576 / Fredericksburg, Virginia
Valve cover - http://boneheadperformance.com / Warminster, PA
He picked it up in winter 2009 - 2010
Summer 2010 looking dialed. Next to my car i just picked up.
RECARO
EG6 LEATHER WHEEL / EG6 CLUSTER
September
Me Slacking Him unhooking wires getting ready to pull motor.
Motor is out.
swap sold to me
Taking off exhaust.
He got his block back. waiting for car to get finished.
OH VTEC valve cover....i recommended the color but he takes all the credit
November 2010
Bought a trailer/engine bay sand blasted
December 2010
Helping him pull up tar mat under carpet.
dry ice/2inch spackle knifes
January 14 2011
Pictures dont do justice....
Looks gooooood.
Picked up from Fredrickburg, Virgina
Jeff Morgan race cars
Phone = 540-604-0576
email = Dan@goJMRC.com
Tell him... Keith and Jack sent you.
certfied 10pt cage in it. Good work / Great price
Could have made this a lil cleaner looking.
But apparently there's a way to make it look fresh still.
Will update when we get to it.
Parachute holder welded to rollcage hole thru bumper
Can be taken off its held on by a bolt simalar to a hitch.
Drilling holes to plate to hold chute onto holder.
Putting chute onto holder.
Parachute is on.
Filling holes for a clean engine bay
Jan. 20th
THE FUN WORK
Vacumm /clean up..plenty more sanding to do.
Last edited by Jackrabbit4; Dec 25, 2011 at 12:13 AM. Reason: ohhhhhh vtec
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 55
Likes: 0
Re: ''got emm'' crew EG hatch build
thanks guys... his teal hatch is now running hope he gets to work on this red car soon again..
2007 CAR TRAILER THE ONE IN THE PICTURE IS FOR SALE IF ANYONE IN THE NORTH EAST AREA $2200 OBO
2007 CAR TRAILER THE ONE IN THE PICTURE IS FOR SALE IF ANYONE IN THE NORTH EAST AREA $2200 OBO
Honda-Tech Member
Joined: Oct 2007
Posts: 702
Likes: 0
From: Neverland Ranch
Re: ''got emm'' crew EG hatch build
Im not trying to sound critical, but the angle of your harnesses from the harness bar to the seat is very severe. If your going to run it that steap, you may as well attach it to the bottom of the seat rail which many should know already is very bad. Im just looking out for your safety. I would hope you can take my advice I am very expirienced with motorsports and SFI/ FIA standards and your current setup is not ok. My suggestion is to raise the harness bar 3-4" and make the harness as close to horizontal into the back of the seat as possible.
Cheers,
Love the build,
-Mark
Here is a photo from our Schroth Harness install guide.
Cheers,
Love the build,
-Mark
Here is a photo from our Schroth Harness install guide.
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 55
Likes: 0
Re: ''got emm'' crew EG hatch build
Im not trying to sound critical, but the angle of your harnesses from the harness bar to the seat is very severe. If your going to run it that steap, you may as well attach it to the bottom of the seat rail which many should know already is very bad. Im just looking out for your safety. I would hope you can take my advice I am very expirienced with motorsports and SFI/ FIA standards and your current setup is not ok. My suggestion is to raise the harness bar 3-4" and make the harness as close to horizontal into the back of the seat as possible.
Cheers,
Love the build,
-Mark
Here is a photo from our Schroth Harness install guide.
Cheers,
Love the build,
-Mark
Here is a photo from our Schroth Harness install guide.
Good looking out... ill let him know
Not sure if its the seat angle your talking about.
He said he is gonna be putting a different seat in there though.
Thanks
Jack
Last edited by Jackrabbit4; Apr 13, 2011 at 06:42 PM.
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 55
Likes: 0
Re: ''got emm'' crew EG hatch build
He's slackinggggg...
Plus he brought it to a shop that was suppose to weld a battery box
up front. An a few other things. Nothing got done for the 8months
they had it besides order him a few parts....
Header / turbo manifold w.e ya wanna call it
Stole off his facebook
valve cover
Motor
Plus he brought it to a shop that was suppose to weld a battery box
up front. An a few other things. Nothing got done for the 8months
they had it besides order him a few parts....
Header / turbo manifold w.e ya wanna call it
Stole off his facebook
valve cover
Motor
Last edited by Jackrabbit4; Dec 25, 2011 at 12:16 AM.
Thread Starter
Honda-Tech Member
Joined: Aug 2010
Posts: 55
Likes: 0
Re: ''got emm'' crew EG hatch build
He put rear disk on the civic right when he bought the car but never mention or show'd them..
Rear disk
December 2011
DON'T JUST LOOK AT IT, FINISH IT KEITH !!!
Rear disk
December 2011
DON'T JUST LOOK AT IT, FINISH IT KEITH !!!
