FS: sleeved ls block $500 firm
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 610
Likes: 0
From: Stockton, California, USA
FS: sleeved ls block $500 firm
For Sale is a b18a1 sleeved block
1. Purchased second hand block seems in good condition only needs to be cleaned up.
2. sleeves 84mm or 84.5mm good for a 2.0ltr block
3. Crankshaft in very good condition
4. includes all main caps only thing you need are pistons,rods, bearings and an oil pan.
Selling because school is expensive and could use the money to pay for it. Any questions feel free to pm me or call/text me 209-629-2567 name is Chris. I would prefer to meet in person to sell the block but shipping would be at buyers expense.
[IMG]http://i66.photobucket.com/albums/h245/cookiesancream/car%20stuff%20for%20sale/block4.jpg
1. Purchased second hand block seems in good condition only needs to be cleaned up.
2. sleeves 84mm or 84.5mm good for a 2.0ltr block
3. Crankshaft in very good condition
4. includes all main caps only thing you need are pistons,rods, bearings and an oil pan.
Selling because school is expensive and could use the money to pay for it. Any questions feel free to pm me or call/text me 209-629-2567 name is Chris. I would prefer to meet in person to sell the block but shipping would be at buyers expense.
[IMG]http://i66.photobucket.com/albums/h245/cookiesancream/car%20stuff%20for%20sale/block4.jpg
Last edited by crispchris; Jan 4, 2011 at 09:53 AM.
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 610
Likes: 0
From: Stockton, California, USA
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 610
Likes: 0
From: Stockton, California, USA
Re: FS: sleeved ls block $500 firm
Here's your proof had the same issue with someone in the NorCal for sale thread:
As i can't find the stamp on the block to prove its a benson product i took that down in the description until I receive further verification from the previous owner of the block who is a member on this site.
For further proof I will attempt to get a hold of a 81mm integra piston to show you that it will not work with this block. Only other thing I had to show proof was by using the measuring tape and the cylinder was quite larger that the 3.19inches that 81mm equals.
sorry about the quality of the pic but as you can see the sleeve is well past the stock 3.19inches and somewhere in between the 3.3-3.35inches that an 84mm-84.5mm cylinder is
As i can't find the stamp on the block to prove its a benson product i took that down in the description until I receive further verification from the previous owner of the block who is a member on this site.
For further proof I will attempt to get a hold of a 81mm integra piston to show you that it will not work with this block. Only other thing I had to show proof was by using the measuring tape and the cylinder was quite larger that the 3.19inches that 81mm equals.
sorry about the quality of the pic but as you can see the sleeve is well past the stock 3.19inches and somewhere in between the 3.3-3.35inches that an 84mm-84.5mm cylinder is
Trending Topics
Honda-Tech Member
Joined: Apr 2004
Posts: 521
Likes: 0
From: Chattanooga, TN
Re: FS: sleeved ls block $500 firm
Here's your proof had the same issue with someone in the NorCal for sale thread:
As i can't find the stamp on the block to prove its a benson product i took that down in the description until I receive further verification from the previous owner of the block who is a member on this site.
For further proof I will attempt to get a hold of a 81mm integra piston to show you that it will not work with this block. Only other thing I had to show proof was by using the measuring tape and the cylinder was quite larger that the 3.19inches that 81mm equals.
sorry about the quality of the pic but as you can see the sleeve is well past the stock 3.19inches and somewhere in between the 3.3-3.35inches that an 84mm-84.5mm cylinder is
As i can't find the stamp on the block to prove its a benson product i took that down in the description until I receive further verification from the previous owner of the block who is a member on this site.
For further proof I will attempt to get a hold of a 81mm integra piston to show you that it will not work with this block. Only other thing I had to show proof was by using the measuring tape and the cylinder was quite larger that the 3.19inches that 81mm equals.
sorry about the quality of the pic but as you can see the sleeve is well past the stock 3.19inches and somewhere in between the 3.3-3.35inches that an 84mm-84.5mm cylinder is
Re: FS: sleeved ls block $500 firm
if thats the case measure the thickness between 2 of the pistons...compare it to a non bored ls block and that should prove if the "factory sleeves" were just bored out..cuz the measurement would be smaller that stock
just an idea
just an idea
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 610
Likes: 0
From: Stockton, California, USA
Re: FS: sleeved ls block $500 firm
If I had access to a stock ls block I would be more than happy to, but at this time I don't. If someone local that was interested in a sleeved block had a stock block and wanted to bring it for comparison I would be more than happy to.
I can take any measurements of this block that anyone would be interested in, but as far as a stock block that would most likely have to be someones own independent research.
I can take any measurements of this block that anyone would be interested in, but as far as a stock block that would most likely have to be someones own independent research.
Thread
Thread Starter
Forum
Replies
Last Post
crispchris
Northern California (Sales)
23
Jan 1, 2011 11:59 AM
