This is the official ALL MOTOR classifieds thread for January - February.

**Rules**

- Each post must be started with FS OR WTB
- Do not reply or quote posts in this thread, PM for all questions
- Please do not post/type in ALL CAPS

What you CAN post in this thread:

- Engines/Any engine component
- Transmissions/Any drivetrain parts
- Electrical components such as ECU'S, ETC

What you CANNOT post in this thread

- No vehicles for sale
- No wheels
- No Brake or Suspension components
- No interior/exterior parts


Any violations of these basic rules, and the post will be deleted. You may or may not be issued infractions and you will lose participation in this thread.

 

want to buy b-series vtec skunk2 pro 3 camshaft....


for sale almost new bogart flystart 13x8 4x100 wheels comes with ope end lug nut $450 plus shipping and paypal fee.

 

SRP pistons P/N 149226
- 11:1 CR with B18C1/C5 head.
- 9.8:1 CR with B16 head

http://www.jepistons.com/Catalogs/SR...6a1-a2-a3.aspx

$400 shipped OBO





GSR stock length Eagle rods. Brand new in box.

$300 shipped.

 

For Sale
RMF Used Drag Headers (Needs Welding/Hairline cracks on flange, very minor) =$400 +shipping/paypal/or pick up welcome

Blox HSL Cam (High Speed Lift) Used =SOLD
Intake (lift 0.496/duration 255)
Exhaust (lift 0.494/duration .256)

 

Not to be a dick, but how can a piston give you "11:1" with a C5 head, but only "9:8" with a B16? It's the same damn casting!

 

EAGLE GSR RODS BRAND NEW!!!

250 + shipping

 

FS: 99 USDM B16A2 Head. Complete minus Dizzy / vtec noid / manifold.
350.00 Shipped

1 - B16a fully disassembled motor, came back from the machine shop, has not been reassembled... customer just left it.. its been 8 months.
200.00 + shipping

1 B16 Crank

75.00 + shipping.

 

RMF NARROW REPLICA HEADER

200+shipping.. used for 9 months.

 

http://www.jepistons.com/Catalogs/SR...6a1-a2-a3.aspx

this is where I pulled it from...

 

FS: I'm selling a brand new set of arias pistons

B-series
84.5mm bore
89mm stroke
11.1:1 comp
with new rings, pins, and locks

$250.00 shipped to lower 48







-Jason

 

FS: Eagle 95mm stroker kit includes crank, rods, and pistons (12.5:1 85mm ) $700. Everything is in good working order, no spun bearings or any other damage whatsoever.

 

i have a built b20/gsr its two days old still in my ef. you can come see and drive the motor,comp test . i can tape engine running and comp test. i come on hard times and need cash for lawyer 1400.00 plus shipping obo heres the build.

offers welcome

84mm b20 block
decked and honed bye a sunnen
fully balanced
gsr crank
i beam lightweight rods
acl bearings
13:1 weisco teflon coated forged pistons
portflow ported b16 heAD
arp head studs
new vtec oil pump
endyne lsvtec kit
skunk 2 valves
serdi 5angle valve job
brian crower stage 2 cams
brian crower springs titanium retainers
supertech teflon valve seals
aem cam gears
cometic head gasket
all new gaskets

 

Used Skunk2 Pro1 Cams $400 plus shipping....still have the original boxes

NIB MSD knock Alert Part No. 8964 ~$260 list....make offer.

Hawk HPS Pads NIB for 97 GS Integra $40 +shipping

 

I have a fully disassembled GSR motor.
OBD1 B18c1


Block
B18C1 Block
Still has Stamp and VIN from Original DC



The block needs to be bored



Head
The head need a few new valves, and a rebuild. Comes with all of the caps, parts etc






New OEM Honda Valve seals

GSR Rods (with bad pistons)


GSR Crank


OBD2 GSR stock Exhaust Header

JDM B20B Rods and Pistons
JDM B20B Head


ACL Main/Rod Bearings for B20/B18

B18A1 Short Block. Nice and rusty, needs a full rebuild

B18A1 Intake Manifold

D16Y7 Motor with 89 Si Head Unknown millage, runs great!


D16Y7 Obd2 Head came of above motor, nothing wrong with it

Custom Engine Harness OBD1 GSR into 89 Si Hatch (BUILT BY 89 CRX Si-R)

B series to EF No Name Mounts (need Bushings)

35 50 75 NOS Sniper Kit

ICW 15" Black with polished lip. Set of 5. 4 have tires on them, the fifth is a spare with some curb rashes on them.
Also a set of 15" racing slicks that were meant for the above wheels.



Everything is make offer, must sell asap.


Email ME
Ben@rollpans.com

 

for sale:

-Endyn sturtted pistons, 14:1 compression setup for .250" long rod, comes with crower rods and pistons freshly coated with rings and pins, $500

-86mm bore sleeved block with LS crank, needs a hone job... $350

-ported bare b16a head, no valves, seals, just needs guides springs seats and valves and ready to go, has rockers etc... $500


-86.5mm x 95mm LS/VTEC longblock with fully ported head, cams, manifold, etc., fully assembled monster motor...$3500neg... you can beatup on any stock k-series setups.

-K20 OBX ITBs, 52mm, $600

-9.5:1 wiseco Turbo pistons and crower rods K20 block, ready for assembly and 25 lbs of boost, with crank and ACL race bearings $1100


pm or email at gbrtuning@aol.com for more details.

 

FS:

H22 JE Forged 11.0:1 Pistons Part #:220992. BNIB, have original work order. *Includes JE Pro Seal ring set, the rings are out of the plastic packaging since I was going to have the rotating assembly balanced, but are NOT filed. $400 shipped.

 

all in fabrication custom H22 intake manifold
heres the ebay auction. don't bid if you don't wanna buy it. this is my 5th time re-listing it!!
http://cgi.ebay.com/ebaymotors/H22-c...Q5fAccessories

 

brand new in the box skunk2 stage 2 cams

need gone asap tryng to put money down on this camaro, make offer

 

G23 built block
86.5 mm Weiseco 11:7 com pistons in an F23A1 block new bearing, new seals micropolished crank. F23 water pump with H22 gear pressed on all timing parts are H22. Back of block is grinded for Qsd H2b kit. Hard times so I gotta sell.
1,200 obo

 

I had a massive brain fart man I'm sorry haha. on me!

 

FS: F20b with crower 3 cams and vs and retainers $1000.00 no intake or exaust manifold
52mm h22 TWM ITBS $1100.00 fpr, fuel rail
k24a4 short block low milage make an offer
fuel cell $30.00
digital 7 plus with pro power hvc coil $450.00
aeromotive fuel pump make an offer
H22/H23 blocks and cranks make offer
tubed 1994 civic hb chasis
Lots of misc stuff, trying to clean out the garage.

email me with any questions or if you would like pics
email maxwellk10@yahoo.com

 

I have a 1994 Integra GSR motor that is for sale. It comers with a:
Hydro GSR transmission, No pop outs, grinds, noises, etc
Competition Stage 3 Clutch
9lb Flywheel
ARP Head Studs
ARP Rod Bolts
ACL Bearings
Skunk 2 Springs
Skunk 2 Retainers
Hondata Thermo Intake Heat Shield Gasket
Head and Intake Manifold Were portmatched to the Gasket
Intake Manifold and Throttle body were port Matched
OEM Head Gsaket
OEM water Pump
OEM Rings
OEM Valve Seals

Engine was recently put together less that 3000 miles ago.
But the rings must have not seated properly because it has low compression in 2 cylinders.

Car still runs awesome once it warns up! But not the best when its cold out.
It does need a PCV valve, because it smokes quite a bit on Upper RPMS. (it smokes alot when cold, then only a little when it the rings seat)
It is still in my car, you can come test drive it today!

Motor is coming out of the car Saturday the 15th, come before then to test drive it, otherwise you will have to trust me!

 

just got these pistons back from my machine shop!
these pistons are ready to run. perfect for pump gas or race gas.


Wisco Pistons w/BRAND NEW RINGS $200
12.5:1 compression ratio
81mm
complete! with wrist pins and c clips
all measured and spec'd ready to run
BRAND NEW piston rings (from race engineering)
comes with brand new headgasket







Wiseco Pistons & rings $200

BRAND NEW HEADGASKET 81mm $100



Headgasket $100 nego

Crower I Beam Rods (used) with ARP BIG BOLTS $300
very strong rods
GSR Length will fit in ANY b18 block as long as GSR crank is used




Crower Rods $300 nego

these pistons will work in ANY bseries block
these rods will work in any b18 block with a gsr crank

COMPLETE PACKAGE $500 all said and done.

the machine work alone was more than the cost of what im selling these parts for

pm for details

check out my other threads..!

 

Toda Spec C’s & Gears 950, W/O gears 725 or trade for Type R’s and cash (Will seperate gears from Cams)





BNIB Mugen Headgasket I just bought this 2 weeks ago. 125



Spark Racing Header(was repaired due to small leak)..no dents 500

 

u still got the gsr engine??????