jdm eg/dc parts tons
Please dont low ball me or ask dumb questions done with honda's for a bit would like to get rid of most everything i am a legit dude and will work with who the best i can here is a list of what i got and i can get pictures for serious buyers and not tired kickers that are going to waste my time
Gsr head dual valve springs and valves not sure what kind but not many miles on the head has new valve guides and victor x intake is tapped for lsv come with obd1 dizzy 650.00 firm


B18B1 Block- Eagle rods arp rod bolts je low comp pistons block gaurd acl bearing oil pan tapped for turbo brand new oil pan gasket gsr water and oil pump block has been spray painted but dont look bad 775.00 FIRM



Brand new intercooler 100.00

Gsr block with eagle stroker kit 500 miles on it needs rings 550.00 just the kit is 3200.00

550rc injectors plug and play pretty sure 150.00

Hondata s300 in p28 with 99 si obd2 to obd1 jumper harness 500.00 shipped
CC Clutch kit stage 4 brand new just open to check out new it is 561.00 NEW! asking 400.00 DEAL!
B16 with spun bearing still in car can here it run make offer has arp head studs and block spacer to lower compression and cam gears
99 Type r head crower daul valve springs and titanuim retainers, skunk2 exhuast valves, TYPE R INTAKE, obd1 dizzy b16/gsr cams 700 firm!
Gsr head dual valve springs and valves not sure what kind but not many miles on the head has new valve guides and victor x intake is tapped for lsv come with obd1 dizzy 650.00 firm


B18B1 Block- Eagle rods arp rod bolts je low comp pistons block gaurd acl bearing oil pan tapped for turbo brand new oil pan gasket gsr water and oil pump block has been spray painted but dont look bad 775.00 FIRM



Brand new intercooler 100.00

Gsr block with eagle stroker kit 500 miles on it needs rings 550.00 just the kit is 3200.00

550rc injectors plug and play pretty sure 150.00

Hondata s300 in p28 with 99 si obd2 to obd1 jumper harness 500.00 shipped
CC Clutch kit stage 4 brand new just open to check out new it is 561.00 NEW! asking 400.00 DEAL!
B16 with spun bearing still in car can here it run make offer has arp head studs and block spacer to lower compression and cam gears
99 Type r head crower daul valve springs and titanuim retainers, skunk2 exhuast valves, TYPE R INTAKE, obd1 dizzy b16/gsr cams 700 firm!
Last edited by Blainel2o2; Jan 14, 2011 at 03:16 PM.
Hi,
Can you provide the specs of the Wilwood kit ie
1. what is the specific model no.
2. is it a 4 piston?,
3. purchase date to determine warranties if any,
4. pads how much left?,
5. bolt pattern of rotors is it 4x100, 4x114.3?
6. include brackets for dc2/eg?
Can you provide the specs of the Wilwood kit ie
1. what is the specific model no.
2. is it a 4 piston?,
3. purchase date to determine warranties if any,
4. pads how much left?,
5. bolt pattern of rotors is it 4x100, 4x114.3?
6. include brackets for dc2/eg?
i bought of my buddy barely used on the intensions of using but never did, bolt pattern is 4x100 and was on dc2 the pads klook brand new and they are 4 piston, i tihnk this price is cheap for what they are i am not sure havnt looked them up.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS: GE sleeved block w Crower rods 1300 shipped, GSR short block, GSR Head w Supertech valvetrain, D
Integralove00
Classifieds: Forced Induction
8
Jul 6, 2005 02:23 PM




