parting out drag car project
Thread Starter
Honda-Tech Member
Joined: Dec 2009
Posts: 229
Likes: 0
parting out drag car project
All Prices Do Not Include Shipping*
Last updated 1/21/2011
*NEW PRICES*
alright this is a long one. Im getting out of it for now. I have new and more important priorities!
iv been working on building a drag car and have got about half way done and im calling it quits.
first off is the shell.
its a clean title 93 vx hatch
has a 8.5 spec 10pt cromolly cage in it
kirkey aluminum seat mounted to cage
only has dash and door panels in it. but i still have most of the interior parts
heres the deal with the shell i can sell it by its self but alot of the stuff i have works with it. the front end was fabbed up to fit the turbo manifold and the turbo, and the water to air intercooler. so it all works together. also have a custom mini radiator for it also. shown in pics. also has a 3 gal water cell mounted in the back
the shell is a roller and has blox drag coilovers 12kfr 18kr blox rear lower control arms hardrace front camber kit and front lower control arms.
Edt traction bar with custom mounts welded onto it for w/a intercooler and top radiator support
also bwr oil catch can has been mounted in oem battery location
Ill let the Shell Go for $2500.
everything else for sale
Used GSR 4.4fd tranny no lsd and has a small 3rd gear stratch when shifting hard above 7k rpm. $325 plus shipping
b series shift linkage $65 plus shipping
used PR3 ITR head clean from machine shop. no valvetrain but includes everything else, lma, rockers,etc $550
uses p72 head. no valvetrain but includes everything else $325
set of ITR cams with aem cam gears, and p72 virgin ecu
cams $400 p72 ecu $75
2 b series valve covers, blox intake manifold for gsr head and 68mm edelbrock tb Valve covers $75 a peice (1 has 2 10an bungs welded on)
intake manifold w/t tb $250
MSD b series distributer/ blaster cap and plug wires, aem fuel rail w/t guage and regulator 4 rc 330cc injector
msd stuff $350 injectors $65
rota 92s old turbo manifold. divided t4 dual mvs 38mm wastegate .still has not been used just mocked up. manifold by its self$750 manifold and 4inch dump pipe $825
4in vband dump pipe $85
new itr oil pump/ with pick up, itr water pump, itr clutch master cylinder
$350 for all of it cost me $662
couple of air guns. 1 craftsman 3/8s 1 kobalt 3/8 on off brand 1/2 and one 3/8 bluepoint by snapon $ 250 for all they work great.
I have some more randon parts like used b series ac commpresor still works $100
used b series starter $25
Used b series alternator $25
new innovative b series solid mounts $250
just pm me or text me 601-940-7455
ill let everything go together for $8500 this would make a great starter package
Last updated 1/21/2011
*NEW PRICES*
alright this is a long one. Im getting out of it for now. I have new and more important priorities!
iv been working on building a drag car and have got about half way done and im calling it quits.
first off is the shell.
its a clean title 93 vx hatch
has a 8.5 spec 10pt cromolly cage in it
kirkey aluminum seat mounted to cage
only has dash and door panels in it. but i still have most of the interior parts
heres the deal with the shell i can sell it by its self but alot of the stuff i have works with it. the front end was fabbed up to fit the turbo manifold and the turbo, and the water to air intercooler. so it all works together. also have a custom mini radiator for it also. shown in pics. also has a 3 gal water cell mounted in the back
the shell is a roller and has blox drag coilovers 12kfr 18kr blox rear lower control arms hardrace front camber kit and front lower control arms.
Edt traction bar with custom mounts welded onto it for w/a intercooler and top radiator support
also bwr oil catch can has been mounted in oem battery location
Ill let the Shell Go for $2500.
everything else for sale
Used GSR 4.4fd tranny no lsd and has a small 3rd gear stratch when shifting hard above 7k rpm. $325 plus shipping
b series shift linkage $65 plus shipping
used PR3 ITR head clean from machine shop. no valvetrain but includes everything else, lma, rockers,etc $550
uses p72 head. no valvetrain but includes everything else $325
set of ITR cams with aem cam gears, and p72 virgin ecu
cams $400 p72 ecu $75
2 b series valve covers, blox intake manifold for gsr head and 68mm edelbrock tb Valve covers $75 a peice (1 has 2 10an bungs welded on)
intake manifold w/t tb $250
MSD b series distributer/ blaster cap and plug wires, aem fuel rail w/t guage and regulator 4 rc 330cc injector
msd stuff $350 injectors $65
rota 92s old turbo manifold. divided t4 dual mvs 38mm wastegate .still has not been used just mocked up. manifold by its self$750 manifold and 4inch dump pipe $825
4in vband dump pipe $85
new itr oil pump/ with pick up, itr water pump, itr clutch master cylinder
$350 for all of it cost me $662
couple of air guns. 1 craftsman 3/8s 1 kobalt 3/8 on off brand 1/2 and one 3/8 bluepoint by snapon $ 250 for all they work great.
I have some more randon parts like used b series ac commpresor still works $100
used b series starter $25
Used b series alternator $25
new innovative b series solid mounts $250
just pm me or text me 601-940-7455
ill let everything go together for $8500 this would make a great starter package
Last edited by MShonda; Jan 25, 2011 at 07:00 AM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Dec 2009
Posts: 229
Likes: 0
Re: parting out drag car project
Valve cover w/t bungs pending
sorry need to update
oil pump is sold
still have gsr water pump and itr clutch master cylinder bnib
need to get everything sold.. make me your best offer
still have
ITR cams w/t aem cam gears
red vtec valve cover w/t aem aluminum plug cover
msd distributer w/t msd blaster cap and plug wires
p72 gsr head
pr3 2000 itr head
virgin p72 ecu
VX drag shell .. great for a starter car to add on to still aking only $2500
cage alone cost me 2,200
sorry need to update
oil pump is sold
still have gsr water pump and itr clutch master cylinder bnib
need to get everything sold.. make me your best offer
still have
ITR cams w/t aem cam gears
red vtec valve cover w/t aem aluminum plug cover
msd distributer w/t msd blaster cap and plug wires
p72 gsr head
pr3 2000 itr head
virgin p72 ecu
VX drag shell .. great for a starter car to add on to still aking only $2500
cage alone cost me 2,200