spoon calipers on EG
prolly coulda put this in the Brakes forum but was afraid no one would look at it lol. ok so iv done alot of research and just wana make sure i have my info right.
i wana put Spoon calipers on my EG. (95 EG coupe EX non abs)
So im going to need DC knuckles so the caliper will bolt on. (DC bearings)
ITR/Legend bracket and machine 3mm off because 5 lug hubs stick out farther than 4 lug.
prelude vtec rotors re-drilled to 4x100 (or aftermarket rotors. someone said fastbrakes makes them)
and ITR sized pads
done?
research done here...
http://www.team-integra.net/forum/di...agePosition=14
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/eg-civic-knuckle-same-dc2-itr-1710024/
i wana put Spoon calipers on my EG. (95 EG coupe EX non abs)
So im going to need DC knuckles so the caliper will bolt on. (DC bearings)
ITR/Legend bracket and machine 3mm off because 5 lug hubs stick out farther than 4 lug.
prelude vtec rotors re-drilled to 4x100 (or aftermarket rotors. someone said fastbrakes makes them)
and ITR sized pads
done?
research done here...
http://www.team-integra.net/forum/di...agePosition=14
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/eg-civic-knuckle-same-dc2-itr-1710024/
A garage, removable steering wheel w/ locking hub, a python and a pitbull. My buddy had a set and within 10 days of install he had strange cars driving by him house at night...then a month later JACKED.
Lol thanks for the bumps and good advice. It is duely noted. But if I get them as a gift... I can't not use them.... Lol
So bump
Anyone know if my information is correct or not?
So bump
Anyone know if my information is correct or not?
Thread
Thread Starter
Forum
Replies
Last Post
smash fascism
Honda Civic / Del Sol (1992 - 2000)
2
Nov 21, 2004 06:13 AM




