Dun dun DUN!!!
Had a customer come to the shop today and ask me about an auto to 5spd conversion on their newly acquired, unfinished EG coupe project. He wanted to know if he could use the dash harness from a 5spd car with the auto body harness so he did not have to fix the wiring that the previous owner had started but never finished. I did not really know the answer to his question, but i thought maybe the body harness needed to be 5spd too. Any help..personal experience???

I have done plenty of 5 spd conversion but i usually just wire the auto dash harness to make everything work...except cruise(because everyone i have converted for did not care about cruise control....pink wire yada yada.)

Any help would be appreciated.

 

Yes, you can use the manual body harness. It all plugs up the exact same. It's what I did when I built my 94 DX hatch, it was auto, But I used a SI harness since I was putting in a D16Z6. Worked fine. -Later, BR

 

Well i know i could use the manual body harness. I was really wondering if he could just use a 5spd DASH harness with the auto BODY harness...and would it work.

 

Any help? This guy called me again this morning...

 

yes it will be fine for him to use the manual harness as long as it is from the same generation car

 

Thread titles MUST be subject specific so that members browsing topics can easily understand the tech problem without reading the post:

https://honda-tech.com/forums/showpo...12&postcount=1

Please familiarize yourself with the stickies at the top.