CLEAN cheap EG W/ 10 point Cage $3300
I NEED THIS GONE!!!! ASAP!!!!
$3300 FIRM without Fuel setup and Parachute
$3600 FIRM With NEW Parachute
$4200 FIRM W/ Fuel Setup
$4500 FIRM W/ Fuel Setup and NEW parachute
LOCATION: CENTRAL NJ
I got a 1994 EG CX thats painted Type R White, Tach says 210K but thats from a different car. Body has around 160k. Cars never seen the street(only on a car dolly) or Track. The car is very very light with a K24 turbo the car only weight 2000lbs
Will Trade for: 92-95 EG Hatch: Seats MINT Carbon Fenders, Mint Carbon Hood, Mint Carbon Trunk, Mint Carbon Doors, SSR Headers, AFI Mani, 36mm HUBS. PM ME with Trades and pictures!!
Included:
1/2 Gallon of Type R White Paint
Black window net with quick release
CF duct built wing
Kens Custom 10 Point Chromoly roll cage w/ parachute Bars
Parachute Release Kit
Black Golden Eagle diffuser
Bloxs Camber Kit
GoodRidge stainless steel brake lines
JDM Glass Headlight with Yellow corners
Carbon Fiber hood painted White when the car was painted
Aero Catch Hood Locks
Power windows, and all windows are tinted
Blox Rear Control Arms
New OEM front Control Arms
Type S Throttle Cable
NOT Included:
Seat
Shifter
50/50 Tail lights (comes with Stock)
Wheels (comes with steel wheels)
No after market Gauges
Stock Steering wheel
Issues with car:
I sold the Knuckles from the car with the 5.9 DSS Axles that were on the car. I Picked up a set of Knuckles, but they were from a DX model. So the Calipers i have are to big for the knuckles. You can either pick up any set of knuckles except a DX model civic/integra and they will work with the calipers. Or u can get DX calipers and it will work on the knuckles.
This car had a K series motor so the passenger engine mount was removed, but the interior harness was never cut so if u wanted to go B series again all u would have to do is get the mount welded back on.
Roll Cage installed alone was $2000
FUEL SYSTEM: Everything was purchased NEW
Black Aluminum 5 Gallon Fuel Cell
Aeromotive Fuel Filter PN#12304
Aeromotive Eliminator Fuel Pump PN#027-11104
Aeromotive A1000 Injector By Pass Regulator PN#027-13101
Fuel lines are Russell black nylon braided
Russell Shock Proof liquid fill fuel gauge
-10an fuel line from fuel cell to fuel rail
-10an fuel line from fuel rail to regulator
-8an fuel line from regulator to fuel cell for fuel return
-8an fuel cell vent tube
over $300 in fittings
$1100
Parachute: NEW stroud Pro-stock Black PN# Stroud 4301
$350
Inside the car is really dusty, and i didn't get a chance to clean inside the car or the engine bay.
















$3300 FIRM without Fuel setup and Parachute
$3600 FIRM With NEW Parachute
$4200 FIRM W/ Fuel Setup
$4500 FIRM W/ Fuel Setup and NEW parachute
LOCATION: CENTRAL NJ
I got a 1994 EG CX thats painted Type R White, Tach says 210K but thats from a different car. Body has around 160k. Cars never seen the street(only on a car dolly) or Track. The car is very very light with a K24 turbo the car only weight 2000lbs
Will Trade for: 92-95 EG Hatch: Seats MINT Carbon Fenders, Mint Carbon Hood, Mint Carbon Trunk, Mint Carbon Doors, SSR Headers, AFI Mani, 36mm HUBS. PM ME with Trades and pictures!!
Included:
1/2 Gallon of Type R White Paint
Black window net with quick release
CF duct built wing
Kens Custom 10 Point Chromoly roll cage w/ parachute Bars
Parachute Release Kit
Black Golden Eagle diffuser
Bloxs Camber Kit
GoodRidge stainless steel brake lines
JDM Glass Headlight with Yellow corners
Carbon Fiber hood painted White when the car was painted
Aero Catch Hood Locks
Power windows, and all windows are tinted
Blox Rear Control Arms
New OEM front Control Arms
Type S Throttle Cable
NOT Included:
Seat
Shifter
50/50 Tail lights (comes with Stock)
Wheels (comes with steel wheels)
No after market Gauges
Stock Steering wheel
Issues with car:
I sold the Knuckles from the car with the 5.9 DSS Axles that were on the car. I Picked up a set of Knuckles, but they were from a DX model. So the Calipers i have are to big for the knuckles. You can either pick up any set of knuckles except a DX model civic/integra and they will work with the calipers. Or u can get DX calipers and it will work on the knuckles.
This car had a K series motor so the passenger engine mount was removed, but the interior harness was never cut so if u wanted to go B series again all u would have to do is get the mount welded back on.
Roll Cage installed alone was $2000
FUEL SYSTEM: Everything was purchased NEW
Black Aluminum 5 Gallon Fuel Cell
Aeromotive Fuel Filter PN#12304
Aeromotive Eliminator Fuel Pump PN#027-11104
Aeromotive A1000 Injector By Pass Regulator PN#027-13101
Fuel lines are Russell black nylon braided
Russell Shock Proof liquid fill fuel gauge
-10an fuel line from fuel cell to fuel rail
-10an fuel line from fuel rail to regulator
-8an fuel line from regulator to fuel cell for fuel return
-8an fuel cell vent tube
over $300 in fittings
$1100
Parachute: NEW stroud Pro-stock Black PN# Stroud 4301
$350
Inside the car is really dusty, and i didn't get a chance to clean inside the car or the engine bay.
















Thread
Thread Starter
Forum
Replies
Last Post
k24egturbo
Vehicles for sale
2
Oct 15, 2010 12:10 PM
Black-Ty [EG6]
Southern California (Sales)
278
Mar 13, 2009 12:29 AM




