Driving a 1990 crx, not sure if the hubs and calipers are stock HF or been swapped with Si or Integra, whatever.
The lower 14mm blot fell out, now the car is undriveable.
Not knowing if the hubs and calipers were swapped out, so i dont want to order the wrong bolt.
The help i am asking for is this, The bolt head is 14mm, the diameter is 10mm, and the thread pitch is 1.00

Does anyone recognize this size bolt is it integra or honda ? The bolt is roughly 2 inches.
Any help is greatly appreciated, The car is undriveable, thanks guys.

 

Regardless, it's the same.

 

 

Take the one out from the other side, go to home depot/hardware store.

Just make sure the hardness is the same, or go to junk yard.

 

A few listing of auto recycler near chattanooga, TN

http://maps.google.com/maps?hl=en&um...ed=0CCAQtQMwAA

 

Thanks guys, im in Iraq right now, i was home on leave a week ago, and this is when the bolt fell out, ordered a Cr-x Si lower bolt and it was the same pitch and everything just slightly too big for the sleeve/slider so it wouldnt work.
i figured because it was duralast, but who knows.
anyways thanks again, before i left back out i ordered one from honda along with a
new sleeve/slider so that should fix it.