h22a sparying gas?
Heyy i got my accord running think god but i still cant drive it because there is gas sparying out of what i thought was a vacume line but i guess its a fuel line its that little black thing by the injecters that runs into the fuel pressure regulator and then a black hose runs out of it this is where my problem is i have no idea where this hose run to and is gas supose to flow though it.... i have a video below sorry for the video idk why youtube does this to my videos.... also its a 1992 honda accord ex (cb7)
http://www.youtube.com/watch?v=WGTtdhg8Ib4
http://www.youtube.com/watch?v=WGTtdhg8Ib4
The little black thing near the FPR if I'm not mistaken is the EVAP valve which should just connect to a vacuum line on the IM.
The FPR should connect to a vacuum line on the IM at the top and the tube from the bottom is the fuel return line (hence you leaking gas). That shouldn't be connected to where you had it - that's the EGR crap. It should connect downwards towards the back of the car. Near the brake master cylinder/brake booster area.
The FPR should connect to a vacuum line on the IM at the top and the tube from the bottom is the fuel return line (hence you leaking gas). That shouldn't be connected to where you had it - that's the EGR crap. It should connect downwards towards the back of the car. Near the brake master cylinder/brake booster area.
Thread
Thread Starter
Forum
Replies
Last Post
tolowhb
Honda CRX / EF Civic (1988 - 1991)
16
Jul 24, 2020 07:37 AM
89sicivic
Honda CRX / EF Civic (1988 - 1991)
6
Jan 31, 2006 08:19 PM




so i just used my F22A6 fuel rail and FRP

