Hey was going on everybody i have an 2001 Integra and im looking to get some nice wheel.......any suggestion ??? Thanxz everyone
Rotas ?
BBS ?
Koning ?

 

just putting my two cents in, but I love oem wheels. powder coated ones look nice too. Love the clean Integra by the way

 

I like the 15" LS mesh,blades,and Si's.Rotas are popular,had the GT3's...nice lip but heavy as hell.Spun Supamesh looks clean and they're reasonable.Check your local Craigslist,I've found plenty of deals on there for wheels/tires.Rota Slipstreams are kinda played out but they're light and look good and come in alot of different colors.Just go on Ebay and type in 4x100 wheels and try to get an idea of what you like.Also,the Tirerack website has an interactive wheel selector where you can see what each wheel looks like on your car.

 

if you wanna do a 5lug swap i got some nice gun metal ITR wheels for sale with new tires

 

powder coated ls webs all the way

 

blades ftw, i have fat 5's too if anyone is willing to trade for blades

 

I have Work RSZ-R 16x7 rims powder-coated matte black and love them. But I also did a 5-lug ITR conversion. I wish I still had 4-lug though cause I can't find any 15x8 or wider wheels in 5-lug so that I can get some f-ing traction. I would highly recommend 949racing wheels, especially if you are looking to turbo in the future.

 

If you're looking for traction, concentrate on getting stickier tires, not wider tires or wheels. More specifically, if you have a very high horsepower application and you go to the dragstrip, consider getting some drag radials. For street use and daily driving, get some of the "extreme performance" tires like the Bridgestone RE-11, Dunlop Star Spec, etc.

 

I am running falken azenis 215-45-16 right now and burn through 1st-3rd gear. I want some wheels that I can only use on weekends and drags at the track so I don't wear them out on daily driving. I also want to option to possibly mount slicks on them in the future if the drag radials don't give me enough traction. And would need at least 8" wheels for a good set of slicks that will hold 570hp...correct?

 

Then get some drag radials. You'll also need to get some 15" wheels because AFAIK they don't come in 16" sizes that would fit an Integra.

Not necessarily. It depends on the tire size. For example, if you get 205/50-15 drag radials, 15x8 wheels are too wide for that size. I'm not sure what size slicks are available; you'll have to check. But you should FIRST decide what kind and size tires you're going to use, and THEN look at the specs to see what wheel widths they can be used on. Asking about the wheel width first is ***-backwards.

 

Correct, that's why I have decided on these drag radials:
http://www.summitracing.com/parts/MTT-3751R/

and these slicks:
http://www.summitracing.com/parts/MTT-3015/

Opinions?

My main problem was finding 15" wheels that are 7-8 in wide, 5x114.3 bolt pattern, have the correct offset (at least -35 i believe) and under 15lbs. The only one's I've found are the rota slipstreams and I've heard the 5-lug wheels crack easily.

Thanks for the help & suggestions.

 

15" TSW stealth, they are 5 spoke very smooth, the match the curves of the car...
http://retrorides.proboards.com/inde...y&thread=65336 I will see if I can post a pic of them on my 94 Teg.

 

The Ls meshies look good, but some Rotas or Enkies would llok good too. Just my $.02